home » Acts » Who can perform the duties of a GIP. The GUI is the chief engineer of the project

Who can perform the duties of a GIP. The GUI is the chief engineer of the project

Single qualification guide positions of managers, specialists and other employees (CEN), 2019
Section "Qualification characteristics of the positions of managers and specialists in architecture and urban planning"
The section is approved by the Order of the Ministry of Health and Social Development of the Russian Federation dated April 23, 2008 N 188

Chief Engineer project

Job responsibilities. Carries out technical management of design and survey work in the design of an object and field supervision of its construction, commissioning and development of design capacities. Based on the use of the latest achievements of science and technology, the most appropriate and economical design solutions provide a high technical and economic level of the designed facilities. Takes steps to improve quality design and estimate documentation and reducing the consumption of material resources in the construction of facilities, reducing the cost of their operation based on improving the quality of design, urban planning and architectural and planning solutions. Prepares data for the conclusion of contracts with customers for the development (transfer) of scientific and technical products, including the justification of contract prices. Participates in the work of commissions for the selection of sites (routes) for construction, in the preparation of design assignments and in the organization of engineering surveys for the development of design estimates and other technical documentation. Organizes its development for the objects assigned to it, participates in the preparation of comprehensive schedules for the implementation of research, design, engineering and technological works for facilities that will use new technological processes and equipment with a long cycle of development, design and manufacture. Makes up calendar plans release of scientific and technical products. Develops proposals on the composition of the project developers, distributes tasks between them by sections and parts of the project, the volume and cost of work. Forms tasks for subcontractors to perform the work assigned to them and provides these organizations with the necessary initial data. Resolves issues that arise during the documentation development process. Carries out control over the technical level of accepted design, urban planning and architectural and planning decisions, economical spending of funds for design and survey work, the timing of the development of design and estimate documentation. Ensures compliance with the developed design and estimate documentation state standards, rules, regulations and guidelines. Provides a check for patent purity and patentability for the first time applied in the project or developed for it technological processes, equipment, instruments, structures, materials and products. He defends the project in higher organizations and examination bodies. Participates in the review and approval of the general contract construction organization design and estimate documentation. Resolves issues that arise in the process of construction design, commissioning of the facility, development of design capacities. Organizes work to eliminate the detected defects in design estimates and other technical documentation, as well as to account for the expenditure of approved estimates. Prepares proposals for management design organization and the customer about entering into working documentation changes associated with the introduction of new normative documents, taking into account the actual state of construction. Coordinates reasonable deviations from existing norms, rules, instructions with state supervision bodies and other organizations that have approved them. Provides analysis and generalization of experience in design, construction and operation of constructed facilities and preparation on this basis of proposals to improve the technical and economic level of design solutions. Prepares reviews and opinions on rationalization proposals and inventions, draft standards, specifications and other regulatory documents related to design and construction. He takes part in the examination of projects, the preparation of publications and the preparation of applications for inventions, in the work of seminars and conferences in his specialty.

Must know: laws and other regulatory legal acts Russian Federation in the field of urban planning; administrative, methodological and regulatory documents for the design, construction and operation of facilities; prospects for the development of architectural and construction design; design methods; organization, planning and economics of design and engineering surveys; advanced domestic and foreign experience in design and construction; basics of standardization, certification and patent science; technical, economic, environmental and social requirements for the designed facilities; requirements for the organization of labor in the design of facilities for various purposes; building regulations; modern technical means design and implementation of computational work; standards, specifications and other regulatory documents for the development and execution of design estimates and other technical documentation; the procedure for concluding and executing contracts for the creation (transfer) of scientific and technical products; economics and organization of construction; Copyright; types of automation equipment design work; labor protection rules.

Qualification requirements. Higher professional education in the specialty "Building Design" or higher professional education And professional retraining in the direction of professional activity; at least 8 years of work experience in the field of professional activity; advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

I. General part.

1.1. The Chief Project Engineer (CIP) is appointed by order CEO enterprises from among managers or specialists.

1.2. The Chief Project Engineer must have:

Higher professional (technical) education,

At least 3 years of experience in the gas industry;

A certificate confirming completion of training in the design of gas supply systems.

1.3. In his work, the chief engineer of the project is guided by the current Rules, SNiPs, GOSTs, methodological and regulatory materials for the design of gas supply systems, guidelines for the development and execution of design estimates, the Regulations on the internal production quality control system for design work, as well as this Job Description.

2. Responsibilities

The Chief Project Engineer is responsible for:

2.1. Provide technical guidance for projects.

2.2. Review and approve design estimates.

2.3. Based on the use of the most expedient and economical design solutions, to ensure a high technical and economic level of the designed facilities and the quality of design estimates.

2.4. Participate in the coordination of design decisions and in the discussion of the project in higher organizations and examination bodies.

2.5. Analyze and generalize the experience of design, construction and operation of constructed facilities, prepare on this basis proposals for improving the design and implementation of measures to improve the technical and economic level of design solutions.

2.6. Monitor the obligatory compliance with the requirements of the current SNiPs, GOSTs, rules, instructions and guidelines for design and other methodological and regulatory documents when implementing projects for gasification.

2.7. Monitor the validity period, timely renewal and making the necessary changes to the license for design work.

3. Rights

The chief project engineer has the right to:

3.1. Submit proposals for the consideration of the General Director on improving the work related to the duties provided for in this instruction.

3.2. Refuse to approve and return for revision the design and estimate documentation, made in violation of the requirements of the current regulatory and guidance materials, as well as deviations from the technical specifications.

3.3. Suspend project team personnel from work in case of gross violations of current regulatory requirements in the project documentation.

4. Responsibility

The Chief Project Engineer is responsible for:

Organization of the activities of the project team;

High-quality and timely execution of design estimates;

Compliance with the requirements of this Job Description.

HR Manager: _____________________ E.N. Pobegailo

"_____" _______ 2003

AGREED:

legal adviser

S.G.Dmitrash

"_____" ____________ 2003

I am familiar with the instructions.

1. General provisions

1.1. The chief project engineer belongs to the category of managers.

1.2. Appointment to the position of chief architect of the project and

dismissal from office is carried out by order (instruction)

the head of the organization.

1.3. A person is appointed to the position of the chief architect of the project,

with higher professional education and work experience in

designing for at least 8 years, and when designing especially large and

complex objects - at least 10 years.

1.4. The Chief Project Engineer must know:

— legislative and regulatory legal acts, administrative and

regulatory materials for design, construction and operation

objects

– profile, specialization and features of the structure of the organization

— technical perspectives, economic development organizations

— design methods

– organization, planning and economics of design and engineering

surveys

— best practices in design and construction

– modern technical means of design and execution

computational work

— design automation tools

— technical, economic, environmental and social demands,

applied to the designed objects

– technical regulations, building codes and regulations

– the procedure for concluding and executing contracts for the creation (transfer)

scientific and technical products

— standards, specifications and other guidance on

development and execution of design estimates and other technical

documentation

– economics and organization of construction

— basics of standardization, certification and patent science

- protection requirements environment

- office work standards (classification of documents, order

registration, registration, passage, storage, etc.)

— fundamentals of labor law

— rules and regulations of labor protection, safety measures,

industrial sanitation and fire protection

1.5. Main architector project in its activities

guided by:

- company charter

- this job description

— regulatory materials for the design of construction and

operation of objects.

1.6. The Chief Project Architect reports directly to

the head of the organization.

1.7. During the absence of the chief architect of the project (business trip,

vacation, illness, etc.) his job duties are performed by an employee,

appointed in accordance with the established procedure, which acquires the appropriate

rights and is liable for non-performance or improper performance

duties assigned to him in connection with the replacement.

1.8. ______________________________________________________________.

2. Functions

2.1. Management of design and survey work.

2.2. Solving financial and technical issues arising in

the process of construction design, commissioning of the facility, development

design capacities.

2.3. Control of compliance with the developed design estimate

instructions.

3. Job responsibilities

The Chief Project Engineer has the following responsibilities:

3.1. Carries out technical management of design and survey

construction, commissioning and development of design capacities.

3.2. Provides a high technical and economic level

objects under design (based on the use of the achievements of science and

technology, the most economical design solutions).

3.3. Takes steps to improve quality

design and estimate documentation and reducing the consumption of material resources

during the construction of facilities, reducing the cost of their operation based on

improving the quality of design, urban planning and

architectural and planning solutions.

3.4. Prepares data for the conclusion of contracts with customers for

development (transfer) of scientific and technical products.

3.5. Participates in the work of commissions for the selection of sites (tracks) for

construction, in the preparation of design assignments and in the organization

engineering surveys for the development of design estimates and other

technical documentation.

3.6. Participates in the preparation of complex plans-schedules of implementation

research, design, engineering and technological

works for facilities where new technological

processes and equipment with a long cycle of development, design and

manufacturing.

3.7. Makes calendar plans for the release of scientific and technical

products.

3.8. Prepares a justification for the cost of design work.

3.9. Develops proposals for the composition of the project developers,

distributes tasks between them by sections and parts of the project, volumes and

cost of work.

3.10. Forms tasks for subcontractors to perform

tasks entrusted to them and provides these organizations with the necessary initial

3.11. Resolves technical issues arising from subcontractors

organizations in the documentation development process.

3.12. Controls the technical level of accepted

design, urban planning and architectural planning solutions,

economical expenditure of funds for design and survey work,

terms of development of design and estimate documentation.

3.13. Ensures compliance with the developed design estimate

documentation technical regulations, standards, norms, rules and

instructions.

3.14. Provides patent clearance and

patentability first applied in a project or developed for

its technological processes, equipment, instruments, structures,

materials and products.

3.15. Conducts project defense in higher organizations and bodies

expertise.

3.16. decides financial questions arising in the process

construction design, commissioning of the facility, development

design capacities.

3.17. Organizes work to eliminate detected defects

design estimates and other technical documentation, as well as accounting

expenditure of approved budgets.

3.18. Prepares proposals for management and the customer on the introduction

in the working documentation of changes related to the introduction of new regulatory

documents, taking into account the actual state of construction.

3.19. Agrees on reasonable deviations from existing norms,

rules, instructions with state supervision bodies and other

organizations that approved them.

3.20. Provides analysis and generalization of design experience,

construction and operation of the constructed facilities and training on this

based on proposals to improve the technical and economic level

design solutions.

3.21. Prepares reviews and opinions on rationalization

proposals and inventions, draft standards, specifications and

other regulatory documents related to the design and

construction.

3.22. Participates in the examination of projects, preparation of publications

and drafting applications for inventions, in the work of seminars and conferences on

his specialty.

3.23. _____________________________________________________________.

(other duties)

The chief project engineer has the right to:

4.1. Participate in the discussion of draft decisions of the head

organizations.

4.2. Dispose of those entrusted to him financial resources And

property in compliance with the requirements determined by legislative and

normative legal acts, the charter of the organization.

4.3. Sign and endorse documents within your

competencies.

4.4. Initiate and conduct meetings on organizational and

financial and economic issues.

information, documents.

4.6. Conduct quality and timeliness checks

instructions.

4.7. Demand the termination (suspension) of work (in case of

violations, non-compliance established requirements etc.), compliance

established norms, rules, instructions give instructions for correcting

shortcomings and elimination of violations.

4.8. Submit to the head of the submission organization

on the hiring, transfer and dismissal of employees, on the encouragement of those who have distinguished themselves

employees and on the application disciplinary action to the workers

violating labor discipline.

4.9. Participate in the discussion of issues related to their performance

official duties.

4.10. Require the head of the organization to provide assistance in

performance of their duties and rights.

4.11. _____________________________________________________________.

(other rights)

5. Responsibility

5.1. The Chief Project Engineer is responsible for:

- for improper performance or non-performance of their official duties

duties as set out in this job description

within the limits set by the current labor law Russian

Federations

- for offenses committed in the course of exercising their

activities, - within the limits determined by the current administrative and

criminal legislation of the Russian Federation

- for causing material damage to the organization - within,

determined by the current labor, civil and criminal

legislation of the Russian Federation

— _________________________________________________________________.

5.2. The chief architect of the project is personally responsible

for the consequences of his unreasonable decision, which entailed

violation of the safety of property, its illegal use or other

damage to the organization.

5.3. ______________________________________________________________.

APPROVE:

________________________

[Job title]

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Chief Project Engineer

General provisions

1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of the chief engineer of the project [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. The chief engineer of the project belongs to the category of managers, is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The Chief Project Engineer reports directly to the head of the Company.

1.4. A person who has a higher professional education and at least 8 years of experience in design or scientific and pedagogical work in the relevant field of knowledge, and at least 10 years in the design of especially large and complex objects, is appointed to the position of chief engineer of the project.

1.5. The Chief Project Engineer must know:

prospects for the development of the relevant sector of the economy, science and technology;
design methods;
organization, planning and economics of design and engineering surveys;
advanced domestic and Foreign experience design and construction;
basics of standardization, certification and patent science;
resolutions, orders, orders of higher authorities, guidance, methodological and regulatory materials for the design, construction and operation of facilities;
technical, economic, environmental and social requirements for the designed facilities;
requirements for the organization of labor in the design of objects for various purposes;
building regulations;
modern technical means of designing and performing computational work;
standards, specifications and other guidance materials for the development and execution of design estimates and other technical documentation;
the procedure for concluding and executing contracts for the creation (transfer) of scientific and technical products; economics and organization of construction;
Copyright;
means of automation of design work;
labor protection rules and regulations.

1.6. The chief project engineer in his activities is guided by:

company charter;
this job description;
regulatory materials for the design, construction and operation of facilities.

1.7. During the period of temporary absence of the chief engineer of the project, his duties are assigned to [name of the position of the deputy], who is appointed in accordance with the established procedure, acquires the relevant rights and is responsible for failure to perform or improper performance of the duties assigned to him in connection with the replacement.

2. Job responsibilities

The chief project engineer is required to perform the following labor functions:

2.1. Carries out technical management of design and survey work in the design of an object and field supervision of its construction, commissioning and development of design capacities.

2.2. Based on the use of the latest achievements of science and technology, the most appropriate and economical design solutions provide a high technical and economic level of the designed facilities.

2.3. Takes measures aimed at improving the quality of design and estimate documentation and reducing the consumption of material resources during the construction of facilities, reducing the cost of their operation based on improving the quality of design, urban planning and architectural and planning solutions.

2.4. Prepares data for the conclusion of contracts with customers for the development (transfer) of scientific and technical products, including the justification of contract prices.

2.5. Participates in the work of commissions for the selection of sites (routes) for construction, in the preparation of design assignments and in the organization of engineering surveys for the development of design estimates and other technical documentation.

2.6. He organizes its development at the facilities assigned to him, participates in the preparation of comprehensive schedules for the implementation of research, design, engineering and technological work for facilities that will use new technological processes and equipment with a long development, design and manufacturing cycle.

2.7. Draws up calendar plans for the release of scientific and technical products.

2.8. Develops proposals on the composition of the project developers, distributes tasks between them by sections and parts of the project, the volume and cost of work.

2.9. Forms tasks for subcontractors to perform the work assigned to them and provides these organizations with the necessary initial data.

2.10. Resolves issues that arise during the documentation development process.

2.11. Carries out control over the technical level of accepted design, urban planning and architectural and planning decisions, economical spending of funds for design and survey work, the timing of the development of design and estimate documentation.

2.12. Guarantees compliance of the developed design and estimate documentation with state standards, norms, rules and instructions.

2.13. Provides verification for patent purity and patentability of technological processes, equipment, devices, structures, materials and products first applied in the project or developed for it.

2.14. He defends the project in higher organizations and examination bodies.

2.15. Participates in the review and approval of design estimates by the general contracting construction organization.

2.16. Resolves issues that arise in the process of construction design, commissioning of the facility, development of design capacities.

2.17. Organizes work to eliminate the detected defects in design estimates and other technical documentation, as well as to account for the expenditure of approved estimates.

2.18. Prepares proposals to the management of the design organization and the customer on making changes to the working documentation related to the introduction of new regulatory documents, taking into account the actual state of construction.

2.19. Coordinates reasonable deviations from existing norms, rules, instructions with state supervision bodies and other organizations that have approved them.

2.20. Provides analysis and generalization of experience in design, construction and operation of constructed facilities and preparation on this basis of proposals to improve the technical and economic level of design solutions.

2.21. Prepares reviews and opinions on rationalization proposals and inventions, draft standards, specifications and other regulatory documents related to design and construction.

2.22. He takes part in the examination of projects, the preparation of publications and the preparation of applications for inventions, in the work of seminars and conferences in his specialty.

In case of official necessity, the chief engineer of the project may be involved in the performance of his official duties overtime, in the manner prescribed by law.

3. Rights

The chief project engineer has the right to:

3.1. Participate in the discussion of draft decisions of the head of the company.

3.2. Dispose of the financial resources and property entrusted to him in compliance with the requirements determined by legislative and regulatory legal acts, the charter of the organization.

3.3. Sign and endorse documents within their competence.

3.4. Initiate and hold meetings on organizational, financial and economic issues.

3.6. Conduct quality and timeliness checks on assignments.

3.7. Demand the termination (suspension) of work (in case of violations, non-compliance with established requirements), compliance with established norms, rules, instructions, give instructions on correcting deficiencies and eliminating violations.

3.8. Submit to the head of the company ideas on the admission, transfer and dismissal of employees, on the promotion of distinguished employees and on the application of disciplinary sanctions to employees who violate labor discipline.

3.9. Participate in the discussion of issues related to their official duties.

3.10. Require the head of the company to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. The chief engineer of the project bears administrative, disciplinary and financial (and in some cases, provided for by the legislation of the Russian Federation, criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure or improper performance of labor functions and the tasks assigned to him.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of the chief engineer of the project is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.

4.3. The main criterion for evaluating the work of the chief engineer of the project is the quality, completeness and timeliness of his performance of the tasks provided for by this job description.

5. Working conditions

5.1. The mode of operation of the chief engineer of the project is determined in accordance with the rules of the internal work schedule established by the Company.

5.2. In connection with the production need, the chief engineer of the project is obliged to go on business trips (including local ones).

5.3. To resolve operational issues to ensure production activities the chief engineer of the project may be allocated company vehicles.

6. Right to sign

6.1. To ensure his activities, the chief engineer of the project is given the right to sign organizational and administrative documents on issues referred to his competence by this job description.

Familiarized with the instructions ____ / ____________ / "__" _______ 20__

APPROVE:

________________________

[Job title]

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Chief Project Engineer

General provisions

1.3. The Chief Project Engineer reports directly to the head of the Company.

1.5. The Chief Project Engineer must know:

prospects for the development of the relevant sector of the economy, science and technology;
design methods;
organization, planning and economics of design and engineering surveys;
advanced domestic and foreign experience in design and construction;
basics of standardization, certification and patent science;
resolutions, orders, orders of higher authorities, guidance, methodological and regulatory materials for the design, construction and operation of facilities;
technical, economic, environmental and social requirements for the designed facilities;
requirements for the organization of labor in the design of objects for various purposes;
building regulations;
modern technical means of designing and performing computational work;
standards, specifications and other guidance materials for the development and execution of design estimates and other technical documentation;
the procedure for concluding and executing contracts for the creation (transfer) of scientific and technical products; economics and organization of construction;
Copyright;
means of automation of design work;
labor protection rules and regulations.

1.6. The chief project engineer in his activities is guided by:

company charter;
this job description;
regulatory materials for the design, construction and operation of facilities.