foundry coke represents solid fuel increased strength, the size of the pieces is larger than the domain. Also, the main difference between foundry coke and blast-furnace coke is the lower sulfur content, not exceeding 1%. Foundry coke grade KL-1 contains up to 0.6% sulfur of the total mass.

The production of foundry coke fraction +40mm is regulated in accordance with GOST 3340-88. It is obtained through high temperature processing. hard coal without air access, due to which volatile substances, excess moisture and other third-party impurities are almost completely removed.

Foundry coke KL-1 +40mm has the following characteristics:

• strength indicators not less than 73.0%;
• moisture content not more than 5.0%;
• ash content not more than 12.0%;
• sulfur content - no more than 0.6%;
• the yield of volatile substances is 1.2%.

Foundry coke brand KL-1 is used:

• as a fuel for iron smelting in blast furnaces and cupola furnaces for melting iron and steel in foundries;
• as a high-quality smokeless fuel in the forging industry, in the production of ferroalloys, in the production of refractories;
• for smokeless drying of premises during the execution finishing works, as a high quality smokeless fuel;
• in the production of building materials for firing limestone, dolomite, gypsum;
• as a sorbent in water treatment plants, for example, to remove machine oil.

You can purchase foundry coke KL-1 +40mm GOST 3340-88 directly from NPK Special Metallurgy LLC. The price of the material depends on the volume of the order, the place of delivery and the method of payment for the goods.

Cooperation with our company is

• quick search for the products you need;
• optimal logistics costs;
• consultation of experienced and highly qualified specialists;
• certified and certified goods;
• complete security at all stages of ordering, payment, transportation.

OOO NPK Spetsialnaya Metallurgy has established stable and reliable relationships with manufacturing plants, and the range of products offered exceeds 1,500 items.

This price list is for informational purposes only and under no circumstances is public offer determined by the provisions of h. 2 Article. 437 Civil Code Russian Federation.

STATE STANDARD OF THE UNION OF THE SSR

FOUNDRY COAL COKE

TECHNICAL CONDITIONS

GOST 3340-88

STANDARDS PUBLISHING HOUSE

Moscow

STATE STANDARD OF THE UNION OF THE SSR

Validity from 01.01.90

until 01.01.95

This standard applies to coal foundry coke intended for use in cupolas in accordance with the nomenclature given in the annex.

1. TECHNICAL REQUIREMENTS

1.1. Main parameters and dimensions

Depending on the mass fraction of sulfur, foundry coke is divided into grades KL-1, KL-2, KL-3, depending on the size of the pieces - into classes of 60 mm or more and 40 mm or more. Foundry coke of class 40 mm and more was allowed to be produced until 01/01/91.

1.2. Characteristics

1.2.1. In terms of quality, coke must meet the requirements and standards specified in the table.

1.2.2. For dry quenching coke, the mass fraction of total moisture is not standardized and is not determined.

1.2.3. Requirements for the quality of coke intended for export are established by the order of the foreign trade association.

Name of indicator	Norm for brand and class						Test method
	CL-1		KL-2		KL-3
	60 mm or more	40 mm or more	60 mm or more	40 mm or more	60 mm or more	40 mm or more
1. Mass fraction total sulfurS d t , %, no more							According to GOST 8606 or GOST 4339
2. Ash content A d , %, no more	12,0						According to GOST 27564
3. Mass fraction of the total moisture in the working condition of the fuelW g t , %, no more							According to GOST 27588
4. Strength index M40, %, not less							According to GOST 8929
5. Mass fraction of pieces smaller than the lower limit, %, no more	14 (20)						According to GOST 5954
including pieces less than 40 mm, %, no more

Notes :

1. For coke grade KL-1 of the Cherepovets Metallurgical Plant, the mass fraction of total sulfur should be no more than 0.8% and until 01.01.91, the mass fraction of pieces with a size less than the lower limit in dry-quenching coke of a class of 40 mm and more - no more than 7.0 %.

2. Coke with the norms indicated in brackets was allowed until 01.01.91.

3. Mass fraction of total moisture for coke grade KL-1 of the Kaliningrad KGZ should be no more than 6.0%.

2. ACCEPTANCE

2.1. Acceptance of coke - according to GOST 2669.

3. TEST METHODS

3.1. Sampling of coke and preparing them for testing - according to GOST 23083 . Until 01.01.91 it was allowed to take samples of coke after roller screens.

4. TRANSPORT AND STORAGE

4.1. Transportation

4.1.1. Coke is transported in bulk in open railway cars in accordance with the requirements GOST 22235 , the rules for the carriage of goods and the technical conditions for loading and securing goods, approved by the Ministry of Railways of the USSR

4.2. Storage

4.2.1. Unloading coke from Vehicle and warehousing should be carried out by mechanisms that should not overgrind it.

APPLICATION

Mandatory

NOMENCLATURE
products and their codes according to the All-Union Classifier of Industrial and Agricultural Products

brand	Chunk size class	Code
CL-1	60 mm or more	07 6122 1210
KL-2	Same	07 6122 1220
KL-3		07 6122 1230
CL-1	40 mm or more	07 6122 1310
KL-2	Same	07 6122 1320
KL-3		07 6122 1330

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of Ferrous Metallurgy of the USSR

DEVELOPERS

L.A. Kogan,cand. tech. sciences (topic leader), R.I. Gorislavtsev; A.A. Filippova; O.G. Unterberger

Foundry coke GOST 3340-88 - buy in bulk from a warehouse in Moscow with delivery throughout the Russian Federation and neighboring countries.
Specify the prices at managers. All questions can be asked by phone 8(800)-555-91-54 - free call within Russia. You can also apply for info@site(any region of the Russian Federation) or msk@site(Moscow and region).

Foundry coke GOST 3340-88 in Moscow according to affordable prices from stock or on order.

Phones for ordering goods

Delivery and service

Delivery of purchased products is carried out anywhere in Russia transport companies. Shipping costs are calculated separately. Delivery is organized by our manager.

If you did not find the desired position on the site- just call us or write - we will process your application during the working day. Due to large sales volumes, our company can cooperate with major manufacturers, as well as sell metal products at affordable prices, which largely depend on the volume of supply.

Our company provides all popular metalworking services- metal cutting, felling, bending, heat treatment, galvanic treatment.

STATE STANDARD OF THE UNION OF THE SSR

FOUNDRY COAL COKE

TECHNICAL CONDITIONS

GOST 3340-88

STANDARDS PUBLISHING HOUSE

Moscow

STATE STANDARD OF THE UNION OF THE SSR

Validity from 01.01.90

until 01.01.95

This standard applies to coal foundry coke intended for use in cupolas in accordance with the nomenclature given in the annex.

1. TECHNICAL REQUIREMENTS

1.1. Main parameters and dimensions

Depending on the mass fraction of sulfur, foundry coke is divided into grades KL-1, KL-2, KL-3, depending on the size of the pieces - into classes of 60 mm or more and 40 mm or more. Foundry coke of class 40 mm and more was allowed to be produced until 01/01/91.

1.2. Characteristics

1.2.1. In terms of quality, coke must meet the requirements and standards specified in the table.

1.2.2. For dry quenching coke, the mass fraction of total moisture is not standardized and is not determined.

1.2.3. Requirements for the quality of coke intended for export are established by the order of the foreign trade association.

Name of indicator	Norm for brand and class						Test method
	CL-1		KL-2		KL-3
	60 mm or more	40 mm or more	60 mm or more	40 mm or more	60 mm or more	40 mm or more
1. Mass fraction of total sulfurS d t , %, no more							According to or GOST 4339
2. Ash content A d , %, no more	12,0						According to GOST 27564
3. Mass fraction of the total moisture in the working condition of the fuelW g t , %, no more							By
4. Strength index M40, %, not less							By
5. Mass fraction of pieces smaller than the lower limit, %, no more	14 (20)						According to GOST 5954
including pieces less than 40 mm, %, no more

Notes :

1. For coke grade KL-1 of the Cherepovets Metallurgical Plant, the mass fraction of total sulfur should be no more than 0.8% and until 01.01.91, the mass fraction of pieces with a size less than the lower limit in dry-quenching coke of a class of 40 mm and more - no more than 7.0 %.

2. Coke with the norms indicated in brackets was allowed until 01.01.91.

3. Mass fraction of total moisture for coke grade KL-1 of the Kaliningrad KGZ should be no more than 6.0%.

2. ACCEPTANCE

2.1. Acceptance of coke - according to .

3. TEST METHODS

3.1. Sampling of coke and preparing them for testing - according to GOST 23083. Until 01.01.91 it was allowed to take samples of coke after roller screens.

4. TRANSPORT AND STORAGE

4.1. Transportation

4.1.1. Coke is transported in bulk in open railway cars in accordance with the requirements , the rules for the carriage of goods and the technical conditions for loading and securing goods, approved by the Ministry of Railways of the USSR

4.2. Storage

4.2.1. Unloading of coke from vehicles and storage should be carried out by mechanisms that should not overgrind it.

APPLICATION

Mandatory

NOMENCLATURE
products and their codes according to the All-Union Classifier of Industrial and Agricultural Products

brand	Chunk size class	Code
CL-1	60 mm or more	07 6122 1210
KL-2	Same	07 6122 1220
KL-3		07 6122 1230
CL-1	40 mm or more	07 6122 1310
KL-2	Same	07 6122 1320
KL-3	Official edition USSR STATE COMMITTEE ON STANDARDS UDC 669.162.16: 006.354 Group L31 STATE STANDARD OF THE UNION OF THE SSR FOUNDRY COAL COKE Specifications Hard coal foundry coke. Specifications Valid from 01.01.90 to 01.01.9S Non-compliance with the standard is punishable by law This standard applies to coal foundry coke intended for use in cupolas in accordance with the nomenclature given in the annex. 1. TECHNICAL REQUIREMENTS 1.1. Main parameters and dimensions Depending on the mass fraction of sulfur, foundry coke is divided into grades KL-1, KL-2, KL-3, depending on the size of the pieces - ^ into classes of 60 mm and more and 40 mm and more. Foundry coke of class ~ 40 mm and more is allowed to be produced until 01.01.91. 1.2. Characteristics 1.2.1. In terms of quality, coke must meet the requirements and standards specified in the table. 1.2.2. For dry quenching coke, the mass fraction of total moisture is not standardized and is not determined. 1.2.3. Requirements for the quality of coke intended for export are established by the order of the foreign trade association. Official publication Reprint prohibited © Standards Publishing, 1989 Norm for brand and class Name of indicator NSG method 60 mm or more Yu mm and more 60 mm or more 60 mm m more 40 mm or more 1 Mass fraction of total sulfur S d t, %, max 2. Ash content A d t%, no more 3 Mass fraction of total moisture in the working condition of the fuel W r u %, not more than 4 Strength index M4D, %, not less than 5 Mass fraction of pieces smaller than the lower limit, %, no more including pieces less than 40 mm, %, no more S. 2 GOST 3J40-88 Notes 1 For coke grade KL 1 of the Cherepovets Metallurgical Plant, the mass fraction of total sulfur should be no more than 0.8% and up to 01 01 91 the mass fraction of lumps with a size less than the lower limit in dry quenching coke of a class of 40 mm and more - no more than 7.0% 2 Coke with the norms indicated in brackets is allowed until 01 01 91 3 Mass fraction of total moisture for coke grade KL 1 of the Kaliningrad KGZ should be no more than 6.0% GOST JJ4Q-88 C. 5 2. ACCEPTANCE 3. TEST METHODS 3.1. Sampling of coke and their preparation for testing - in accordance with GOST 23U83. Until 01.01.91 it is allowed to take samples of coke after roller screens. 4. TRANSPORT AND STORAGE 4.1. Transportation 4.1.1. Coke is transported in bulk in open railway cars in accordance with the requirements of GOST 22235, the rules for the carriage of goods and the technical conditions for loading and securing goods, approved by the Ministry of Railways of the USSR. 4.2. Storage 4.2.1. Unloading of coke from vehicles and storage should be carried out by mechanisms that should not overgrind it. APPLICATION Mandatory INFORMATION DATA 1. DESIGNED AND INTRODUCED by the Ministry ferrous metallurgy of the USSR PERFORMERS L. A. Kogan, Ph.D. tech. Sciences (topic leader), R. I. Gorislavtseva; A. A. Filippova; O. G. Unterberger 2. APPROVED AND INTRODUCED BY Decree of the USSR State Committee for Standards dated December 20, 1988 No. 4323 3. The term of the first check is 1992. What can be sold to earn? Building materials store business plan How to open a branch of an online store? Business Model Review: Mall Island Popular Small Business CNC Machine Usage Business plan for a pet store with calculations: how to open from scratch what you need How to sell goods on Amazon for hundreds of thousands of dollars a month, being in Russia Selling on amazon pitfalls Open a business with a budget of 200,000 rubles Open your showroom where to start What is the most profitable business to start from scratch - tips for a beginner in all respects How to start a construction business from scratch without money Construction business from scratch How to calculate the profitability of a household chemicals store How to name a company so that it is successful: recommendations for business owners The ups and downs of billionaire george soros in a brief biography 2023 nt-csm.ru A breakthrough in your business - Information portal