» »

Wifi login required how to remove. When connecting to open Wi-Fi, the Internet does not work, or why it is not possible to connect to a free (unsecured) Wi-Fi network

What is wifi authentication on a phone or tablet, most users of mobile devices know "firsthand" - after all, "users" encounter a connection to a wireless network almost daily. However, why go through this “procedure”, and for what reasons the Wi-Fi authentication problem arises, not all owners of modern tablet computers understand.

So, wifi authentication: what is it?

Authentication is a security check when connecting a device to Wi-Fi over a secure connection. During the authentication process, the device tells the Wi-Fi equipment the secret code entered by the user.

With the correct password, wifi router connects the device to the network, otherwise the connection is dropped. Thus, only users who are members of the circle can use Wi-Fi resources. proxies", who know.

In other words, Wi-Fi authentication on an android device is a message to the router of the cipher to enter the network and its subsequent check for a match with the password specified in the router settings.

wifi authentication error android: what to do?

Typically, the authentication process takes a few seconds. But sometimes, when connecting to WiFi (after entering the password), the device shows the “authentication” status for much longer - a Wi-Fi authentication error occurs on the phone, or the device is endlessly authorized on the network.

Typically, this problem occurs for one of the following reasons:

  1. 1. Incorrectly entered secret code to connect to WiFI

If you entered the wrong secret code (made a typo, entered it in the wrong layout, or just someone changed the code without your knowledge), then you will not be able to connect, and the "authentication" status will last longer than usual, and will end with an error message.

Solution: check if the password is entered correctly. If you are connecting to a wireless network outside of your home (for example, at your workplace), ask your system administrator or colleagues for a new password.

If you establish a connection with, and are sure that the code was entered correctly, then we advise: perhaps they have been changed without your knowledge.

  1. 2. Mismatch between the connection type in the tablet settings and Wi-Fi equipment

Security standards are constantly improving and changing, so that modern Wi-Fi equipment can operate in various modes that are incompatible with each other. And often a Wi-Fi authentication error on a tablet occurs due to a mismatch between the settings of the android device and network equipment.

For example, if the Wi-Fi router is set to and the access point type on the tablet is set to WEP mode.

In this case, the tablet will see the network, but will not be able to pass the authentication process.

Solution: remove the access point from the list. Search available WiFi networks and try . If you have access to the router settings, you can also check the security settings and change them.

  1. 3. Long distance between router and tablet

In addition, the problem of authentication when connecting to wifi may occur due to. In this case, you need to shorten the distance between the Wi-Fi equipment and the tablet.

Everyone who uses services on the Internet knows the situation when, in order to access the services of the site, we are required to go through registration or authorization procedures. Typical examples– websites of banks and payment systems. Authorization of WiFi users is related to the prohibition of anonymous access to the network through public access points. New order use of Wi-Fi networks is set out in the Decrees of the Government of the Russian Federation No. 758 of 07/31/2014 and No. 801 of 08/12/2014.

Legislative requirements for WiFi networks

In case of non-compliance with the laws on the operation of Wi-Fi, the network operator is threatened with sanctions up to the deprivation of the license for the right to provide these services. Among the main requirements for Wi-Fi common use in addition to the prohibition of anonymous access to the network includes the collection and storage of information about the user for six months.

Access to the public Internet is opened by the identification and authorization of Wi-Fi users, which are essentially identical procedures. They confirm the identity of customers and guests of establishments. The difference between the two is that identification is performed on the first login to the network, while authorization is required on subsequent occasions.

Our proposals for organizing Wi-Fi networks

Arranging a wireless Internet access network from scratch consists of the following steps:

  • - determination of the network architecture with the number and placement of access points, coverage and other parameters;
  • - selection and installation of equipment according to the developed plan, including equipment for storing data about network users;
  • - providing software to manage the operation of the system, including the implementation of identification and authorization procedures.

If necessary, we will provide services for organizing Wi-Fi access on existing networks.

  • - the client selects the desired Wi-Fi network in the settings of his mobile device, thereby filling out a request to enter it;
  • - then the user enters the login and password into the electronic form received during the first entry into this network;
  • - after sending the form, an SMS will be sent to your number confirming the right to access the network.

To evaluate the design options and page settings of the site system, you can see examples of our work. We guarantee reliable and stable operation of the Wi-Fi network.

Benefits of our services

To organize wireless access to the Internet, our company uses the most modern equipment from leading manufacturers. This provides a high degree of security and sufficient throughput communication channels, as well as the stable operation of the Internet. We guarantee the minimum terms of execution of orders and provide a full package of services.

How to become our partner

JSC "RusSvyazIntegration" provides services to clients from Moscow, St. Petersburg, Moscow and Leningrad region. To become our partner, call, write to email or fill out an application for connection. Everything else is our business. We will definitely find mutual language with the customer.

Now every cafe, as well as a large shopping mall have a wi-fi network. But, in recent years keep open networks wireless access is prohibited by two laws at once. Therefore, all owners of such establishments are interested in Wi-Fi with authorization. This will allow both to attract customers and not to violate relations with law enforcement officers.

What is Authenticated Wi-Fi

This is a closed wireless network. Access to it is carried out by a password or a one-time code that is generated by the system. Such a system can be applied in the following cases:

The reasons for this decision may vary. But, the problem is solved by the same measures.

How is authorization done

There are several different ways to identify a user. by the most simple option are used at home and when organizing a local wireless network of an organization. They set a password that only family members or employees know.

Using a password is not suitable for public places. Here authorization by entering a password is not possible. There are several methods for granting access to visitors:

  • One time code.
  • The use of each of these methods has its own characteristics.

Authorization by SMS is the most convenient way. In this case, the staff of the establishment does not touch the work of wi-fi. The user, when trying to connect, sees a page with an offer to receive SMS with a code to his number. The disadvantage of this service is its cost. Depending on the operator, the price can range from 1000 to 2000 rubles per month.

Another option for organizing a HotSpot is to connect special equipment, which generates a unique code. Often this method is called passport access. Usually access is denied to minors. There is no monthly fee for this service. But you have to buy optional equipment. There is an additional burden on staff.

Device

Setting up a HotSpot is not difficult. First, we decide on the provider. Based on his requirements, we purchase equipment. Some operators offer everything you need for rent. It makes sense to think about this option. Also be sure to decide how users will be authorized. If you do not pay attention to this issue, you can get a significant fine.

I was always a little surprised by similar questions, in which they wrote that when connected to an open (unprotected) WiFi networks, Internet does not work. Or a phone, laptop, tablet and other devices generally refuse to connect to open Wi-Fi. Asked for some advice on what can be done to solve this problem.

And today, I saw on our forum, a message that says that the phone catches an unpassworded Wi-Fi, connects to it without problems, but the Internet does not work. Then I analyzed the comments on the site a little, and realized that the question is very popular, and I have not yet written articles on this issue. I will correct the situation now 🙂 .

Now, we will figure out why there are problems connecting to someone else's, albeit open, wireless networks. We will try to find out if something can be done about it, and if so, what.

I want to write right away that we will consider problems with the connection and operation of the Internet connection, through foreign, wireless networks that are not password protected, and with which you can establish a connection.

All problems that arise when connecting to your own networks, that's a different story. It’s just that there will be more ways to solve this or that error, since you have access to the settings of the router itself.

No matter how sad it may sound, but if your smartphone, tablet, laptop, etc., does not want to connect to open Wi-Fi, or the Internet does not work after connecting, then most likely, somehow fix this situation, do not succeed. Somewhere in 90% of cases, you will have to measure it. Somehow I wrote sadly 🙂 .

Why? Yes, because we don’t know what kind of access point it is, whose it is, how it is configured, and most importantly, we don’t have access to the settings of this router, because it’s not ours, but a neighbor’s, some store, cafe and etc. I think this is understandable and logical.

Here, take for example the question that I wrote about at the beginning of the article:

He was left on our forum, in this thread:.

The question is good, but do you think it is possible to answer something in essence to this question? I also think not. Maybe it's just that the Internet is not paid. There is a connection, but the Internet does not work. standard situation. Maybe some kind of blocking is enabled there, or the phone did not like the channel on which it works.

I would highlight two main problems. On them, we will divide the article. This will make it easier and more understandable.

Can't connect to an open Wi-Fi network

This is probably the most popular question. On laptops (and desktop computers), it could be an error "", or something else.

On mobile devices (phones, tablets), it could be…” (by the way, laptops can also have this problem “Identification…”), "". There may be other errors as well.

If you can’t connect, then you need to think about why this network is not protected. Yes, there are people who simply forget to do this, or they don't need to. They just let everyone use their internet (this is the case with home hotspots). But, I'm sure that in most cases, there is no password because filtering by MAC addresses is enabled there (read). Which protects even better than a password.

What can you try to do?

As a rule, when connected to unsecured networks, the signal strength is not very good. See that the network level is at least two divisions. Otherwise, connection problems may arise precisely because of a weak signal.

If you are connecting a laptop (regular computer with adapter), then make sure that in the properties wireless adapter, in the IPv4 protocol, was set to receive an IP automatically. Like this:

I showed on the example of Windows 7. In Windows 8, everything will be exactly the same.

If the problem is observed on mobile devices that run on Android OS, or iOS (iPhone, iPad), then I don’t even know what to advise. Except how to monitor the signal level. There seems to be no special settings that would interfere with the connection.

Internet not working when connected to unsecured Wi-Fi

Well, the second problem is when everything is connected, but the Internet does not work.

On a laptop, there will be a “No Internet access” status and a yellow triangle next to the network status (in), and on mobile devices, the Internet will simply not work, and the Wi-Fi icon will most likely be gray instead of blue (depends on OS, firmware version, etc.).

How to fix the problem?

If the problem is on the computer, then check the IP settings, as I showed in the screenshot above. Disable antiviruses and firewalls, they can block access to the Internet.

If the problem is on mobile device, then check if the manual settings proxy. How to do this, I wrote in the article (after the heading “check if the proxy is disabled”).

In other cases, the problem is most likely on the side of the router itself. Or, your device cannot work with the parameters that are set in the router settings.

Afterword

As I wrote above, if the phone does not connect to the network, then you are unlikely to be able to do something. If it connects, but there is no Internet access, then exactly the same. The network is not ours, we don’t know what’s wrong with it, we can’t change the settings. Almost all the problems that arise with Wi-Fi are to blame for the access points themselves. And, if you try to fix something, then you need to change the settings in them. Provided that your device works normally with other networks.

If you have something to add on this issue, then you can do it in the comments below. You can also post your questions there.

Government Decrees No. 758 and No. 801, as well as the federal law No. 97 require Internet access organizers to authorize users of their Wi-Fi network by phone number. This is necessary to prevent anonymous access to the network by scammers and intruders. Therefore, in cafes, restaurants, bars, clubs and other public institutions with free Wi-Fi for guests must be authorization.

What is Wi-Fi Authorization

When connected to Wi-Fi, users are taken to an authorization page where they need to enter their phone number. The system remembers the link "mac-address of the device - phone number" and releases the device on the Internet. Any device: phone, laptop, tablet or computer has its own unique mac-address. You can link multiple devices to one phone number. Each of them will have access to the Internet after authorization. Thus, the user and his devices are identified, and data about them is stored in our system for 12 months in accordance with the law.

How Wi-Fi Identification Works