Rockwool dealers. Plants of the Rockwool Group

Zheleznodorozhny, Moscow region

The ROCKWOOL plant in Zheleznodorozhny, Moscow Region, is the Group's first production facility in Russia. In 1998, the company acquired one of the five Mosasbotermosteklo enterprises, and in 1999, it began manufacturing ROCKWOOL products. To match international standards buildings, production lines, electric furnaces, gas cleaning facilities were modernized, new equipment and filters were installed. The plant in Zheleznodorozhny, like other ROCKWOOL enterprises in the world, produces stone-based thermal insulation using the unique technologies of the ROCKWOOL Group of Companies.

• The largest manufacturing enterprise in the city and the Moscow region.
• About 700 employees work at the plant.

Vyborg, Leningrad region

The ROCKWOOL plant in the city of Vyborg, Leningrad Region, was opened in 2006. It is one of the Group's most modern production facilities. The plant was built almost "from scratch" on the basis of objects of construction in progress, which were purchased by ROCKWOOL, to be reconstructed. The production is a joint project of the ROCKWOOL Group and the Danish Investment Fund for Central and Eastern Europe. Investments amounted to about 60 million euros. Products are shipped to Russian market and also to Finland.

• Modern factory of the European level.
• Active member social projects and beautification programs.
• The largest taxpayer in the region.
• Totally coincides environmental standards ROCKWOOL Group of Companies and Russian regulatory requirements in the field of ecology and safety.
• The plant employs about 300 employees.
• Competitive wage and a full social package.

Troitsk, Chelyabinsk region

The third ROCKWOOL plant in Russia was officially opened on August 11, 2010. The cost of the deal was about $50 million. The capacity of the plant at the time of launch was 30,000 tons per year. In 2011, production capacity was increased by 50%. In the future, the company plans to invest in expansion production capacity. The plant supplies energy-efficient and fireproof thermal insulation to consumers in the Urals, Siberia and Kazakhstan.

• The largest manufacturing company in the city.
• Modern factory of the European level.
• Active participant in social projects and improvement programs.
• The largest taxpayer in the region.
• Fully complies with the environmental standards of the ROCKWOOL Group and Russian environmental and safety regulations.
• About 270 employees work at the plant.
• Competitive salary and full benefits package.

SEZ "Alabuga", Republic of Tatarstan

The fourth Russian plant of the ROCKWOOL company, located in the Republic of Tatarstan on the territory of the special economic zone "Alabuga" (Yelabuzhsky district), was solemnly opened on April 4, 2012. The Rockwool Group invested $150 million in the first production line. This is the largest amount in the history of the company invested in the creation of a new manufacturing enterprise in the world. The basis for the decision on the location of the new ROCKWOOL production was the favorable investment conditions of the Alabuga Special Economic Zone, as well as the business-oriented approach of the Tatarstan authorities.

• Production volumes are 110 thousand tons per year with the possibility of installing a second production line, which will double the existing capacity.
• No. 1 in the field of innovations used in the production of thermal insulation from stone wool in the world.
• The plant produces an innovative product of the ROCKWOOL company - Light Butts SCANDIC, the first stone wool insulation that is subjected to compression.
• About 270 people work at the plant, mainly from Yelabuga, Nizhnekamsk and Naberezhnye Chelny.
• Products are supplied to the Volga region, the Urals, Siberia and Kazakhstan.

CJSC Mineralnaya Vata(Moscow region, Zheleznodorozhny) is part of the group of companies rockwool International AC (Denmark). The plant was put into operation in 1999. In the creation of this plant, the company rockwool invested more than $20 million. The design capacity of the plant exceeds 20 thousand tons of products per year.

LLC "Rockwool-North" the largest enterprise in Russia for the production thermal insulation materials based on basalt fiber. The enterprise is located in Vyborg, Leningrad region.

The opening of the enterprise took place in May 2006. 63 million euros were invested in the construction. The plant is built according to the latest technology and technology and can produce all types of thermal insulation. Approximately one fifth of the production will be sent to the general construction sector, 10-15% will be used in individual housing construction. By 2008, the plant should reach its design capacity - 50 thousand tons of heat-insulating products per year. If necessary, the plant's capacity can be increased to 71 thousand tons in accordance with market needs.

The enterprise will supply its products to the markets of the Leningrad and Moscow regions, Moscow and St. Petersburg, the Urals, Siberia, as well as for export to Finland and the Baltic countries. At the same time, up to 20% of the volume of manufactured products will be exported.

Last year, the company's sales rockwool in Russia (together with the plant in Zheleznodorozhny) amounted to 100 million euros. But, according to the company's specialists, even a sixfold increase in the capacity of this production will not be able to meet the needs of Russian builders. The building insulation market is growing at 15-20% per year. The need for premium class insulation, which is produced by the plant, is growing much faster.

In 2006, the Company offered unique products, which have no analogues in any other company in Russia. This is a thermal insulation produced using double-density technology - a compressed or compressed board, which allows to reduce transportation costs by 20-30%; as well as thermal insulation with a springy edge. The first group includes roofing slabs RUF BATTS EXTRAtm, VENTI BATTS Dtm for ventilated facades and FACADE BATTS Dtm for plaster facades. To the second - plates with a springy edge, mainly intended for structures on a wooden frame (FLEXI BATTStm), and compressed thermal insulation, which shrinks during packaging and reduces storage and transportation costs (LIGHT BATTS Ktm).

Dual Density Board is a monolayer (rather than a bonded material) that has a rigid upper and less dense lower layers. In practice, double density allows you to achieve an increase in the speed of work - labor costs can be exactly half as much. Previously, it was necessary to fasten the lower heat-insulating plate, and then the upper one, but now there is only one material that has the properties of two plates. New items will reduce construction time by 10-15%. Previously, in a two-layer solution, both the first layer and the second layer of insulation were fastened with dowels. By using a dual density board, you can avoid wasting fasteners. Reducing the cost of installation can be about 15-25% depending on the design. The stronger top layer of the new slab ensures impact resistance during transport, and also reduces the amount of waste during installation and plastering work on facades.

The effect of a springy edge is achieved by processing the long side of the plate in a special way. The advantage of using such a product is its tight fit to structural elements (there are no gaps through which up to 80% of heat loss occurs) and the minimum amount of waste during installation. The scope of application is low-rise housing construction - attics, interfloor and attic floors, ceilings over cold undergrounds, frame walls and partitions on a wooden frame.

Similar plates are successfully used in Europe. Sales experience in other countries shows an increase in the share of new products in the Company's total sales in the roofing and facade segments up to 80%. It is planned to allocate 35-40% of the total production of two Russian plants rockwool in the Moscow and Leningrad regions for the production of double-density boards.

Detailed range and specifications products rockwool are shown in table 3.

The range and technical characteristics of products manufactured under the brandrockwool

Table 3

Table 3 continued

Description

The ROCKWOOL group of companies (Rokwool) is a world leader in the field of production building materials from stone wool.

The company's products are widely used for thermal insulation and sound insulation of building structures, in addition, they are used for shipbuilding, industrial equipment, pipelines and air ducts. Stone wool prevents the spread of open fire, so fire protection is another function of the material.

The first plant of the company was opened in Denmark, and today 28 ROCKWOOL plants (Rockwool) operate in 18 countries of the world.

The company began to cooperate with Russia more than forty years ago, but only in 1995 the first sales office was opened. Today, four ROCKWOOL plants (Rockwool) are operating in Russia, equipped with the latest technology. The fourth plant, opened in 2012, has the most powerful production line in the world.

The company's research and development center is located in Denmark, where products undergo strict quality control at all stages of production. The safety of ROCKWOOL products (Rockwool) confirms the presence of eco-labels.

The idea of ​​creating basalt wool was borrowed from natural processes. The natural neutral component - stone - makes up about 98% of the entire composition of the ROCKWOOL thermal insulation product (Rockwool).

You can buy "Rockwool" products in our online store "Brick Around"

ROCKWOOL Company is a world leader in the production of non-combustible insulation based on stone wool. ROCKWOOL products are used for all types of building structures of buildings and structures, as well as for shipbuilding, industrial equipment, pipelines and air ducts.

This company was founded in 1909. In 1937, in Denmark, the ROCKWOOL company began the production of mineral wool insulation based on rocks basalt group.

Today, ROCKWOOL owns 28 factories in 18 countries: in Europe, North America and Asia.

Thanks to the colossal experience of ROCKWOOL, it is able to fully satisfy the needs of consumers around the world. An important advantage of the work is the constant development of know-how. To this end, product tests are carried out annually, research is carried out with the involvement of independent experts, and production technologies are improved.

ROCKWOOL manufactures several types of mineral wool materials for building and technical insulation.

ROCKWOOL thermal insulation passed quality control in international organizations, the Center for State Sanitary and Epidemiological Surveillance in Moscow, the Federal Center for Certification in Construction, VNIIPO of the Ministry of Internal Affairs of Russia. Expert opinions on product quality are confirmed by relevant Russian and foreign certificates.

Why is it profitable to buy ROCKWOOL insulation?

• Resistant to mechanical stress
• has excellent