30.03.15, 22:48  Articles  0

The network on the computer may disappear for several reasons, depending on the provider and independent. For example, in the summer, the connection very often falls off during a thunderstorm and the provider may not restore it too quickly. Sometimes it takes up to several days. What to do if you urgently need to go online from a computer, and the stationary Internet does not work. You just need to connect mobile phone via a USB cable to the system. Let's take a look at the various options available. The choice of method depends on what phone you have. It can be a smartphone on Android, IOS (Iphone) or Windows.

Connecting a computer to the Internet via USB and Android

First you need to check if you have everything. You will need:

• computer,
• smartphone on Android (it is assumed that the Internet on the device is connected, configured and working without interruption)
• USB cable

In fact, the procedure is very simple:

1. We connect the smartphone to the PC via a USB cable.
2. Go to Menu -> Settings -> Other networks -> Modem and hotspot -> USB modem check this box. The computer will detect a new device and try to install the drivers. If the automatic installation of the drivers does not happen, then you will need to install them from the disk that came with the kit. If it is not there either, then we ask friends and acquaintances to download them for your device and install them via a USB flash drive.
3. Make sure your old connection is disabled. Depending on your operating system, additional prompts may pop up on your PC. You can safely press OK in them, the OS is configured for a new network interface.
4. After the work done, the Internet should appear, which is shared from your phone.

Do not forget that you will have to pay for it according to the tariff of the mobile operator. Be careful with this and turn it off as soon as possible.

To break the connection with the network whose traffic is taken from the phone, just unplug the USB cable or uncheck the box above.

Connecting a computer to the Internet via iPhone using USB

For those who have an Apple Iphone as a smartphone, the instructions for setting up an Internet connection are slightly different, but connecting a computer to the network is still very simple.

You will need:

• iphone smartphone with configured output in Mobile Internet.
• phone cable
• computer with the latest version of iTunes installed on it

The gist remains the same:

1. First, make sure that the Internet is set up and working.
2. We connect the cord to the phone and the system unit
3. go to Settings -> Tethering
4. Move the switch to the on position. and select the item only wifi and USB

To check whether there is traffic on the PC or not, go to the following path in Iphone Control Panel -> Network and Internet ->View network status and tasks. If something is wrong, restart the computer and connect the iPhone to it again.

We hope this article helped you connect to the Internet using your mobile phone. If you have comments or questions, please ask them in the comments.

Instruction

First, make sure your phone is running one of the operating systems: Android, iOS (Apple), Symbian, or Windows Phone. In addition, the phone must support 3G/HSDPA Internet connection, not just WAP and GPRS/EDGE.

In the main settings of the phone, find the "Network" item and "jumper" or use the "on / off" key. enable the use of the phone as a modem.

After that, in the same place, in the network settings, activate the mobile Internet so that your phone can communicate with the global network.
Internet settings should be similar to the settings proposed by the operator. Use the APN access point, login and password that your mobile operator offers you. Detailed information connection parameters can be found on the official website of your mobile operator.

Now that the device is ready, using a proprietary USB cable, connect the phone to the computer. If you are using an Android communicator, select the default connection type "Internet tethering" in the PC connection settings.
If the computer notifies you that the operating system has found a new device and prompts you to download and / or install the modem driver, agree by clicking the “OK” or “Accept” button.

The phone can notify you about the beginning of the connection with a special notification or a bar on the screen, as it does Apple iPhone. Also, near the clock in the tray on the computer screen, you will see an image in the form of one monitor with a socket (Windows Vista / 7) or two blinking monitors (Windows XP). This icon indicates that the Internet connection is established, you can open the browser and start browsing the web.

Related videos

note

Remember that mobile operators set a high price for the cost of 1 megabyte of received and transmitted data, and unlimited tariffs often limited by the speed and volume of traffic.

Related article

Sources:

• how to connect internet via phone

There is not always a computer or laptop at hand at the right time, and if it is, it does not always have access to the network. From time to time, everyone has unforeseen situations when Internet access is urgently required. Even if you don't have access to your regular provider, you can access the network using your own cell phone with a positive balance and support for WAP and GPRS, which is now provided by almost all modern handsets. In this article, you will learn how to set up the Internet on your mobile phone, as well as how to use your phone as a modem to access the network from a computer.

Instruction

After the new device appears in the Windows Device Manager, launch the manager program. Wait for it to finish downloading, and then look for an icon that allows, among other program functions, to create an Internet connection.

Click on the desired button and select the type of mobile operator for further settings. Depending on which operator provides you mobile communication, enter different information in the communication settings window.

You can find out the settings for the IP address and DNS address from your provider by calling the office or finding instructions for setting up mobile Internet on its official website.

After that, you can connect via the modem on your phone and surf the Internet in the usual browser that you use on your computer.

In addition, if your phone supports Java and http, you can access any sites directly from your phone by setting in the phone menu mobile connection with a network. In order to open websites, install the MiniOpera browser on your phone. To view mail and communicate in ICQ, you can install additional Java applications.

Related videos

Tip 3: How to connect the Internet to a laptop if there is no phone

There are several ways to connect the Internet to a laptop. If you have home phone, then connecting a computer to the Internet via a telephone line can be done through a regular modem (the so-called dial-up connection or dial-up remote access) or through an ADSL modem. If you don't have a phone and the ISPs haven't connected a leased line to your home, it's still possible to get Internet access. To do this, you need a cell phone.

You will need

• cellular telephone, software and cable to it.

Instruction

Make sure that the mobile phone supports GPRS technology (almost all modern phones are capable of this). Call the support service of the mobile operator and find out if the GPRS service is connected to your tariff plan. If not connected. Submit a request to join. At your request, the staff will send the settings to your phone in the form of SMS. Save them.

Set up a connection and computer. To do this, use a special cable for your phone or a USB cable (today, many phones have a USB connector). You can also connect your phone to a laptop via Bluetooth wireless technology, if your phone has this capability. Install phone software. It is often included on a CD. If there was no such disc in the kit, you can download the program for free from the website of the phone manufacturer. For example, for Nokia phones, such a program is called Nokia Ovi Suite. As part of such a program, as a rule, there is a utility for setting up an Internet connection. If this is not possible, set up an Internet connection manually.

Set up the modem. To do this, select "Phone and modem" in the control panel, specify the country, area code. In the "Phone and modem" window, go to the "Modems" tab, check the phone's modem in the list and click the "Properties" button. In the next window, go to the tab "Advanced communication settings", and write down the initialization string, click the "OK" button. You need to find out the initialization string from the support service of your mobile operator. For example, for MTS, the initialization string will look like this: AT+CGDCONT=1,"IP","internet.mts.ru".

Set up an Internet connection on your computer. In the control panel select " Network connections» - «Creating a new connection». Follow the instructions in the New Connection Wizard." Enter one of the following as the dial-in phone number: *99#, *99***1#, *99**1*1#. The number depends on the phone manufacturer. Check with your mobile operator. After completing the setup, click on the connection shortcut on the desktop, click the "call" button and wait for the Internet connection.

Sources:

• Site of the mobile operator "MTS".

Tip 4: How to connect to the Internet using your phone

When using a mobile phone as a GPRS modem, you can create several connection types. Usually, either a cable connection or a connection via a BlueTooth channel is chosen.

You will need

• - USB cable;
• - PC Suite.

Instruction

First select the type of mobile phone connection to the computer or . In the case of the second equipment, it is better to use BlueTooth, provided that there is a built-in BlueTooth adapter. If this is not possible, make a direct connection using a USB cable.

Now download and install a program designed to set up synchronization of a mobile phone with a computer. Usually these utilities are called PC Studio (Samsung) or PC Suite (Nokia and Sony Ericsson). Restart your computer to complete the installation of the selected application.

Now launch the PC Suite program and wait for the connection with your mobile phone to be established. If, after the connection is made, a menu appears on the phone screen with a choice of its operating mode, then activate the “Modem” or PC Suite function. If you select the "USB storage" operating mode, you may experience problems using your phone as a modem.

Open the Internet Connection menu and configure it. Settings computer program are no different from the settings of the mobile phone itself. It all depends on your carrier. Save the Internet connection settings and click the "Connect" button.

Wait while the program establishes a connection with your operator's server. Launch your internet browser and check if your internet connection is active. Minimize the program window, but do not close it.

To save traffic and increase the speed of opening web pages, it is recommended to use special applications, or configure your browser. First, open your browser settings and turn off the "Auto-download image" feature. Usually, it is these elements that greatly slow down the loading of pages. Install the Traffic Compressor program and turn it on when you connect to the Internet.

Related videos

Tip 5: How to connect the Internet to a computer via cellular

The Internet plays an important role in human life. It is used for work, communication, entertainment. There are many ways to connect the Internet to a computer, one of which is to use a mobile phone.

Instruction

Connect your cell phone to your computer. To do this, use one of the following means: USB cable, infrared port, bluetooth connection. After connecting the phone, the system will detect the connection of a new device. Some phone models, when connected to a computer, issue a request for the type of connection: as a modem or as a storage device. Select required option.

After that, install a driver that will allow you to use your phone as a modem. As a rule, it is located on the CD that comes with the phone itself. If for some reason there is no disk or driver, download it from the official website of the manufacturer. To do this, launch an Internet browser, go to the manufacturer's website, select the required phone model in the list of products, and then click on the link to download the driver. After installing it, restart your computer.

Check if your phone is working properly as a modem. Select "Start" -> "Control Panel" -> "Phone and Modem". Enter the area code and open the "Modems" tab. If your phone is on the list, the driver is installed correctly. If not, repeat the installation procedure.

In the same tab, select the modem and click on the "Properties" button. Open the Diagnostics tab and select Query Modem. If there is no result, most likely another modem installed in the system is interfering with the work. Using the settings, connect it to the COM port, the serial number of which will be greater than the number of the telephone modem's COM port.

Create connections for Internet access. Select “Start” –> “Connection” –> “Show all connections”. Select "Create a new connection", then "Connect to the Internet", "Set up a connection manually", "Via a regular modem". Select a telephone modem from the list. Set an arbitrary name of the service provider, enter *99# or *99***1# as the number. The name and password for each mobile operator is different - as a rule, they coincide with the name of the operator. For example, beeline, mts, etc. Next, click "Finish". Using the created connection, you can access the Internet.

Tip 6: How to connect to the Internet on a computer through a phone

There are many ways in which you can access the Internet, and one of them is to connect to the network using a mobile phone. This is easy to do, just follow a few simple steps.

Instruction

First of all, check the balance on yours and make sure that it has enough funds to use the Internet. You can get information on the tariffication of the gprs connection by calling help desk your operator or on its official website.

Prices for mobile Internet in 3G and 4G networks have almost come down from sky-high heights to the ground and soon, it is to be expected, will be equal to the cost of traditional cable communication. And there, you see, they will completely force it out, because using the Internet, which is always with you (in cell phone), much more convenient than being tied to its stationary source.

Switching from fixed Internet to 3G / 4G is a matter of a couple of minutes. It is enough to have an agreement with mobile operator(access to the global web today is included in almost any tariff plan) and some amount on the balance sheet. Well, the mobile phone itself, which will be the connection point.

Let's talk about how to connect the Internet to a computer using an Android smartphone as a modem.

Phone as a modem via USB cable

Connecting to the Internet through a phone connected to a computer via a USB cable is perhaps the easiest. This method is convenient in that it does not require settings and does not need measures to protect against hacking and access by strangers, like wireless communication. The connection is established in seconds and works almost uninterrupted, of course, subject to a good signal cellular communication and a quality USB cable.

Procedure:

• Go to the Settings app (in older Android versions- "Settings"), open the section wireless networks, go to the advanced wireless settings (in my example, they are hidden behind the "More" button).

• Turn on "Mobile data", that is, connect your phone to a 3G / 4G Internet network. Or do it in a different way - by pressing a button in the blind, etc. On different Android smartphones, this and the subsequent actions are performed a little differently, but the essence is about the same.

• While in the advanced settings for wireless networks, open the "Tethering mode" section. Move the "USB Tethering" slider to the "On" position.

Setup completed, connection established. Now your computer is connected to the global network via a USB cable and a network of a mobile operator.

Bluetooth tethering on phone

If you want to connect devices equipped with a bluetooth module (laptops, smartphones, tablets) to the network, you can use your phone as a bluetooth modem. To establish a stable connection, client devices should be located no further than 8-9 m from the phone, but best of all - in close proximity. Also, make sure that the bluetooth adapter is activated on all devices.

How to connect to the Internet via a bluetooth modem on your phone:

• Turn on 3G/4G internet on your phone.
• Go to the application "Settings" - "Wireless networks". Move the Bluetooth slider to the On position.

• Go to the "Bluetooth" section and select from the "Available devices" list the device to which you want to provide access to the World Wide Web. If there are several, connect one by one. When windows appear asking for permission to pair, check the code and click the "Connect" button on both devices to be connected.

• Open the "Tethering mode" section in the advanced settings of wireless networks and turn on the Bluetooth modem.

Now your gadgets have access to global network. By the way, at the same time you can continue to use the phone as a modem connected to the computer via USB.

Creating a Wi-Fi hotspot on an Android phone

To connect the Internet to a laptop, tablet, smart TV and other devices located in different parts of the apartment, it is most convenient to use Wi-Fi. And our smartphone will again be the access point and modem.

To set up an access point and Internet connection:

• Turn on the Wi-Fi module and 3G/4G internet on your phone.

• Go through the advanced settings of wireless networks to the "Modem mode" section. Touch the line "Wi-Fi hotspot".

• In the "Wi-Fi hotspot" section, move the slider shown in the screenshot to the "On" position. Before connecting devices to it, you need to make a few more settings.

• Touch the "Save hotspot" line. In the window that opens, select the appropriate option. To save battery power, it is best to turn it off after 5 or 10 minutes of inactivity. If the phone is permanently connected to the power supply, then the hotspot can always be saved.

• The next setting is the network name, encryption method and password. The name (by default, it usually repeats the name of the phone model) can be anything. The best way protection (encryption) - WPA2 PSK. If you are going to connect an old device to this access point, such as a laptop with Windows XP, choose WEP protection. Next, set a password that users will enter when connecting client devices, and save the setting.

• To communicate with devices equipped with a WPS button, you can use the same function on your phone. First, press WPS on the client device, followed by the "Connect" button shown below on the phone.

After that, your gadgets will have access to the World Wide Web via Wi-Fi. By the way, if you wish, you can use all 3 types of connection together, but with a very intense load on the network modules, the phone will heat up (which is clearly not good for it) and, despite being powered from a computer via USB, it will quickly use up battery power. Therefore, it is still not worth loading it to the maximum. For such cases, it is better to use a traditional cable Internet connection.

You can connect the Internet to your phone through your mobile operator or through wifi network. In the first case, the necessary parameters can be configured manually or automatically. Features of setting in automatic mode are the same for all mobile operators, while manual setting may differ. After connecting the Internet, the mobile phone can be used as a modem (device that distributes the Internet).

It is important to understand that the ability to connect the Internet to the phone and use the phone as a modem depends on the model. mobile device. All modern phones on the Android, iOS and Windows Phone platforms have maximum capabilities.

Automatic setup from a mobile operator is the easiest way to connect the Internet to a mobile device. The setup instructions are similar for all types of phones and all Russian mobile operators. The procedure is as follows:

1. Call the support service of your mobile operator and ask to send the settings for connecting to the Internet. These settings are provided free of charge, regardless of the connected tariff plan. Within a few minutes, an SMS with the necessary settings will be sent to your phone. Most often (but not always) SMS comes without additional request immediately after connecting the SIM card to a new phone.
2. Open SMS and click "Install" (the button is located below, on the left). All necessary settings will be set automatically.
3. Reboot phone. Setting the settings requires a mandatory reboot, without it the Internet will not work.

If after installation automatic settings Internet access has not appeared, you need to pay attention to the following points:

• Mobile operator account balance. Internet access is possible only with a positive balance. Even if the tariff plan assumes absolute unlimited Internet access, this does not change anything. In most cases, after topping up the balance, the phone also needs to be restarted.
• Setting preferences. If the account balance is positive, you can try to reset the settings, for which you need to open the SMS received from the operator again and click the "Install" button.

In any case, the first thing to do when the Internet is turned off is to restart the phone (except for situations with negative balance). As a rule, this helps in almost 100% of cases.

Connecting with Wi-Fi

Wi-Fi is a wireless network. You can connect to it only if you have a special Wi-fi module. If the Internet from a mobile operator is available to almost all phone models (with the exception of the oldest ones), then only new mobile devices released on Android, iOS and Windows Phone platforms can use Wi-fi.

As in the case of the Internet from a mobile operator, the Wi-fi network will not work if the user's personal account runs out of funds. But you can check the balance only if you are the owner of this network.

How to connect wifi on android

To connect a wireless network to Android phones, you need to turn on the Wi-fi module, select the appropriate network and connect to it. For this you need:

1. Select the "Settings" icon in the main menu.
2. Find the line Wi-fi. Opposite it there will be a special slider that needs to be moved to the right (to activate the Wi-fi module). If the slider is already at the far right, skip this step.
3. Open list available networks by clicking on the Wi-fi line. The system will display all available wireless networks. Near each of them there will be an icon with the signal level, the better it is, the more bars will be painted over on the icon. The speed of the Internet directly depends on the signal level.
4. Find the desired network and click on it. If Wi-fi is password protected, the system will require you to enter the appropriate code. If there is no password, the connection will occur automatically. After connecting, an icon will appear at the top near the icon with the signal strength of the mobile network, displaying the strength of the Wi-fi signal.

How to connect Wi-Fi on iOS

The iOS operating system is used by mobile devices from Apple. To connect Wi-fi to such a phone, you must:

1. Go to the settings and sequentially go to the tabs "Basic" - "Network" - "Wi-fi".
2. Turn on the Wi-fi module by moving the enable slider to the right. If the module is enabled, this item can be skipped. As soon as you turn on your phone, it will search for available wireless networks to connect to.
3. Find and select the desired wireless network. If it is protected by a password, it must be entered in the field that appears, after which the connection will occur. There will be a checkmark next to the Wi-Fi network you are using.

How to connect wifi on windows phone

For WiFi connections on a phone with a Windows phone operating system, you must:

1. Open a list of all programs.
2. Find and select the "Settings" section.
3. Find and select the line Wi-fi.
4. Enable the Wi-fi module if it is disabled. To do this, move the slider to the right.
5. Find and select the Wi-fi network you want to connect to. If it is password protected, it will need to be entered in the field that appears. Once connected, it will say "Connected" next to the wireless network you are using.

Using the phone as a modem

After connecting the Internet to the phone, the phone itself can be turned into a modem. There are three ways to do this:

• Via USB cable;
• Via Bluetooth;
• Through the creation of a wireless access point.

Modem from phone via USB cable

This method allows you to turn almost any phone into a modem (even older models). But it is important to understand that a low mobile Internet signal will be just as low when used on a computer. This method makes sense if the signal level is not lower than 3G. Here are the instructions for connecting your phone to a computer for Android phones:

1. Connect the phone to the PC via a USB cable, after which you need to wait for the automatic installation of the drivers stored on the phone. In some cases, drivers must be installed from the boot disk that came with the phone, or downloaded from the Internet and installed manually.
2. Display the connection menu on the phone. As a rule, by default, the phone connects to the computer as a media device, but it must be set to USB mass storage mode. To display the menu, go to the "Notifications" of the phone and select "Connected as ...".
3. Select the USB storage option.
4. Activate USB modem. To do this, go to the settings, then sequentially go to the "More" and "Modem mode" tabs (the path may differ depending on the manufacturer of the mobile device). In the new window, you need to move the slider opposite the line "USB modem" to the right.
5. If the connection is successful, a window with settings will automatically pop up on the computer. new network, where you need to select the type of new network (home network) and wait for the connection to be established. In some cases, the phone will need to be restarted.

Modem from phone via Bluetooth

To create an access point via Bluetooth, you must:

1. Turn on Bluetooth on both devices. On an Android phone, this can be done in the settings menu by activating the slider opposite the Bluetooth item. The system will automatically search for available devices.
2. Select the desired device through the phone and connect to it.
3. Go to the modem mode settings menu and turn on the Bluetooth modem. To do this, select "Settings" - "More" - "Modem mode" in sequence.
4. Reboot your phone if necessary.

Modem from the phone through the creation of a Wi-fi hotspot

To distribute the Internet on the principle of Wi-fi, you must:

1. Open the settings menu and go to the "Modem mode" section.
2. Activate the slider opposite the item "Wi-fi access point";
3. Go to the wireless settings section.
4. Enter the network name, select the type of protection and enter the password under which you can connect to the distributed Internet. For example, to protect the WPA2 level, the password must contain at least eight characters. Later, when distributing wireless internet there is no need to enter the setting data, it will be automatically saved (except when the user needs to change the login password, network name or security type).

Internet to MTS phone

The manual way of setting up the Internet is much more complicated than the automatic one. For the mobile operator MTS, the instruction is as follows:

1. Allow the use of mobile data. To do this, in the phone settings, select the "Mobile networks" section and activate the slider there opposite the "Data transfer" line. On some phone models, "Wireless Networks" and "Mobile Internet" may be indicated, respectively.
2. Create a new user profile. To do this, in the same section, you must select the creation of a new entry point (the corresponding button is located below, on the left). A window will appear where you need to specify: Name - MTS, APN - internet.mts.ru, User - mts, Password - mts. All other lines must be skipped. When you follow these instructions, Internet access will be provided.

Internet on Beeline phone

Manual Internet setup on Beeline is as follows:

1. Allow data transfer. You can do this in the settings menu by going to the section mobile networks, and by activating the slider next to the data transfer point. You can skip this step if data transfer is already enabled.
2. Create a new profile for network access. In the mobile networks section, you must select the creation of a new point (the button is located at the bottom left). In the window that appears, enter the following values: Name - Beeline Internet, APN - beeline.ru, User - beeline, Password - beeline. All other lines do not need to be changed. After creating a new profile, it must be saved and assigned as the main one for accessing the Internet.

Internet on Megafon phone

Manual Internet setup on Megafon is as follows:

1. Enable data transfer on your mobile device. To do this, through the phone settings, you need to find the section of mobile or wireless networks. A window will open where you need to enable data transfer using the activation slider.
2. Create a new entry point profile. In the mobile networks section, at the bottom left there is a button "New hotspot". After clicking it, a window will open where you need to specify: Name - Megafon, APN - internet, User - gdata, Password - gdata. All other items should remain unchanged. After creating a profile, it must be saved and selected as the main default.

Internet on Tele 2 phone

Manual Internet setup on Tele 2 is as follows:

1. Enable data transfer. To do this, open the settings of the mobile device, and select the mobile networks section. In the window that opens, you need to find the item "Data transfer", opposite it there will be an activation slider that you want to move to the right.
2. Create a user profile for Internet access. In the mobile networks section, select the "Create a new point" tab (located at the bottom left). A window with settings will open, there you need to enter: Name - Tele2 Internet, APN - internet.tele2.ru. The "User" and "Password" lines, as well as all other parameters, must be left unchanged. After entering the data, the access point must be saved and selected as its main default for accessing the Internet.

What if you need Internet, where there is no Wi-Fi access point or a dedicated Internet line? This is especially true for those who travel a lot or are often on business trips for work.

There are several options here:
1. Buy a 3G modem from any mobile operator.
2. Use mobile internet through mobile phone.
3. Use mobile 3G internet via smartphone c wifi module(90% of smartphones since 2012).

First option can be used if you do not have a mobile phone that supports GPRS or EDGE connections. Usually these are phones made before 2005. But this option is not cheap! You need to buy a 3G modem and pay a monthly fee for the Internet.

Second option more interesting. Here it is important that your phone supports GPRS or EDGE connection. In this case, you do not need to pay anything extra, because. mobile operators usually include a certain number of free megabytes of Internet in any tariff package. In extreme cases, you can choose a tariff package for yourself, where there are definitely free or inexpensive megabytes of the Internet.

I will tell you how to enable the Internet on a computer using a mobile phone using the Samsung C3322 Duos phone as an example. This phone has everything you need to use the Internet directly from your phone or connect it to the Internet on your computer. And it doesn’t matter if it’s a desktop computer or a laptop.

My goal was to connect my laptop to the internet via my mobile phone using a PC-to-phone connection via BlueTooth (bluetooth) to avoid fiddling with wires.

Now step by step how I connected my computer to internet via mobile phone using BlueTooth connection.

1. Check the Internet connection settings on your phone. To do this, you can send MMS. If it is sent, everything is in order, there is a connection. If it is not sent, you need to call the operator and receive settings from him via SMS and set these settings.

2. Turn on BlueTooth on your phone. In my case, the path on the phone is: Menu - Applications - BlueTooth - Options - Settings - Enable / Disable BlueTooth

3. Turn on BlueTooth on your computer. On my laptop, BlueTooth is turned on using the Fn + F3 key combination (the antenna icon or specifically the BlueTooth icon can be drawn on the BlueTooth power button). If your computer does not have a built-in BlueTooth adapter, you can buy it separately and connect via USB.

4. When BlueTooth is turned on on the computer, the BlueTooth icon will appear near the clock (lower right corner of the desktop). At the same time, additional drivers for the BlueTooth modem will be installed.

5. Click on this icon with the RIGHT mouse button and select "Add device". Then follow the instructions of the Add Device Wizard. During the search, the phone may ask for permission to connect to the computer, pay attention to this and click on "Allow" or simply "Yes" on the phone.

If the Wizard did not detect your phone, then check if BlueTooth is enabled on the phone, put the phone closer to the computer (range up to 10 meters), check in the START menu - DEVICES and PRINTERS (for Windows 7) your phone may have already been found earlier.

6. Go to the START menu - DEVICES and PRINTERS (for Windows 7), if the Wizard does not automatically transfer you to this panel after the search.

7. We click with the RIGHT mouse button on the picture of the found phone.

8. Select "Dial-up connection" - "Create a dial-up connection ..." (for Windows 7).

9. Select any modem from the list, usually the first one in the list.

10. Enter the phone number, usually *99#, you can find out more precisely from your operator or look on the Internet using the search. "Username" and "Password" are usually not filled in, this can also be checked with your operator. Next, we call the connection as you like - it's just a name.

11. Click the "Connect" button. The wizard will create the connection. Please note that the phone may ask permission to connect - click "Allow" or just "Yes" on the phone. If the wizard displays an error message, the selected modem may already be connected, just select another modem from the list - repeat steps 7-10.

12. Everything. You can enter the Internet, which will prompt you to do the Connection Wizard. With the following connections, select the desired connection (via phone) already through the "Network Connections" icon near the clock, the lower right corner of the desktop.

ATTENTION!!! If for some reason you need to delete an extra connection, go to START, select "Run", write ncpa.cpl this is a panel Network connections , which for some reason is hidden in Windows 7, and here you can already delete or rename connections. Use the RIGHT mouse button on the selected connection.

Thus, using your mobile phone, you can easily connect your computer to the Internet where there is no way to connect via a dedicated line or Wi-Fi connection.

Third option- this is to make a router or access point out of your smartphone. On a smartphone, you need, respectively, to have either 3G Internet or regular mobile Internet.

So, open the top panel of your smartphone or tablet and turn on "Access to Wi-Fi / Wi-Fi Direct" (you need to hold your finger a little to open the settings).

Save settings and open wifi connections on the computer (antenna in the lower right corner). In the list, select your network and connect by entering the password that was in the settings or the one that you yourself came up with.

Everything, now the Internet works on the computer!