home » Calculation » How to connect Wi-Fi on a Philips TV: Hamster's personal experience. Possible TV malfunctions and their elimination Connecting Philips smart TV to the Internet

How to connect Wi-Fi on a Philips TV: Hamster's personal experience. Possible TV malfunctions and their elimination Connecting Philips smart TV to the Internet

Do I need to buy a special WI-FI adapter for my Philips TV? It is necessary if the device model of this brand is equipped with the ability to activate Smart TV, but does not have a built-in device for connecting to a wireless network. In fact, the situation when a television receiver has Smart TV technology in the list of additional features, but is not equipped with a built-in Wi-Fi signal converter, occurs quite often.

In this case, you will either have to connect the device to the Internet via a cable, which is not very convenient, or purchase a special adapter that will allow you to connect the TV to a WI-FI network. But first things first.

What is a WI-FI adapter

A WI-FI adapter is a special device that allows you to connect a wireless Internet connection to the device. It acts as an intermediary that receives the signal, converts it, and then transmits it to the device to which it is connected.
In addition to receiving and transmitting a WI-FI signal, such devices can significantly expand the functions of devices, in this case a TV, by activating smart TV capabilities.

The advantages of using removable Wi-Fi converters for television receivers are as follows:

fast connection;
no need for additional cable laying;
high speed signal reception / transmission;
ease of operation;
compact dimensions.

The disadvantages include the waste Money to purchase additional equipment. Often, devices such as removable USB converters for TVs are quite expensive. And the main inconvenience is that television receivers are not able to recognize the usual universal devices that are used for computers, tablets or laptops. For each device - a representative of the brand of a particular manufacturer, only an adapter of the same brand is suitable and no more. So, for Philips TVs, there are two models of network converters, the characteristics and capabilities of which will be discussed below.

Phillips Wi-Fi Receiver Models

For Phillips television receivers, the manufacturer provides two models of adapters - PTA128/00, PTA01/00. Wi-Fi adapter for Philips TV is installed via the USB port on the side of the device. An important point is that these converters are not suitable for all Phillips TV models. You can get acquainted with the list of device models that can recognize and support PTA01 and PTA128 connection on the official website of the manufacturer.

Model PTA128/00 is:

high connection speed;
the ability to install a special plug and play program;
extended range due to dual antenna.

Model PTA01/00 is another representative of converters from Phillips. The model has become widespread among users, although it is more expensive than the previous representative. Using PTA01, the user gets:

high speed connection;
data protection with WPA2 encryption;
plug and play installation.

Among the possibilities of Smart TV with WiFi connection converters include:

control TV and Smart TV using a tablet, phone or keyboard;
viewing photos, films;
audio playback;
watching programs at a convenient time even after the broadcast;
a large number of Internet applications.

Connecting and configuring Phillips adapters

The procedure for connecting the PTA128 and PTA01 network receivers and their configuration is quite simple thanks to the clear interface of this brand of television receivers. Consider the sequence of actions when connecting the converter to the device:

Find the USB connector on the device panel. Most often, this connector is located on the side of the TV case.
Insert the adapter into the socket. If necessary, you can additionally use a USB cable.
After the device is connected, the program for installation and configuration will start. wireless network for the device.
After starting the program, the screen will display step-by-step instruction by setting wireless connection to be followed.
You can use WPS for setup if your router has one.
If there is no WPS, the WPA password is used, after entering which the device will connect to the network.

Thus, the process of connecting and configuring the network converter is simple and within the power of any user. Before buying this species Wi-Fi signal receiver, you need to make sure that your TV model is capable of wireless connection to the network. Usually you can find such information in the instructions that came with the device. For such devices, a special type of marking on the packaging is also provided. The Wi-Fi Ready label indicates that the device does not have a built-in Wi-Fi signal receiver, but it is possible to connect additional devices to establish a wireless connection.

Do you want to know what a smart TV from Philips is, what are its features and capabilities? Then this article is for you. In general, the concept of Smart TV involves the merging of the functions of TV and computer Internet technologies, but each manufacturer invests in their products unique distinctive features, Philips also has them.

Philips smart TVs run the webOS operating system, which turns them into multifunctional multimedia centers. The following features are available to users:

Convenient work on the Internet;
Unique games and applications that expand the functionality of the device;
Watching videos online without a PC;
Philips Smart TV has a number of features that were previously available only to owners of computers;
Special widgets that provide users with all the necessary information;
Tools for comfortable interactive communication;
Incredibly high image quality;
Support for Android TV OS in a number of models;
Intuitive interface;
Availability of Google services;
A convenient and useful recommendation system that automatically selects movies and other materials based on user preferences.

Of course, such a device needs access to the Internet. It can be accessed via Wi-Fi or via cable connection. In the case of a wireless connection, simply select it from the list and launch it. After the upgrade process, which will be described in the next section, you can enjoy all the variety of smart TV features.

During the first launch, the system will issue the terms of use, with which the owner must agree.

You must also give permission to use cookies. Registration on the official website in this case is voluntary and you can refuse it.

For the correct operation of the equipment, it is necessary to obtain latest version software. You can do this by going to the “Main Menu Configuration” item. You will be notified when the update process is completed.

There are 10 main ways to restore WiFi on modern TVs. Most of them are related to fixing the wireless network settings. Required settings on Samsung, LG, Panasonic and Sony devices can be changed at home without contacting service center.
Consider in turn all the main ways to fix configuration errors:

1. Reboot TV and router

The first action to take if WiFi does not work on the TV is to restart the Smart TV and the router. The failure can be programmatic in nature and can be easily corrected by re-initializing the device drivers. To restart your TV, turn it off and on again. Some experts also recommend unplugging the appliance and then plugging it back in. This advice makes sense for those TVs that remain connected to local network even after turning off the screen.

When rebooting the router, you must wait 10-20 seconds between turning it off and on. During this time, the previous Internet session will be closed on the provider's side. Therefore, the connection will be made again, with reset settings. When the Smart TV and router turn on again, try connecting WiFi.

2. Manually specifying connection data

Using the Smart TV's built-in menu, navigate to Settings WiFi connections. Select the manual mode for specifying settings if the DHCP server is disabled on the router, and the connection with automatic settings does not work. In the "IP address" line, enter any IP from the local range. Valid start and end addresses are available for clarification in the admin panel of the router.

In the "Subnet mask" field, you must specify which part of the IP range will be used to address local network clients. A common value for this setting is 255.255.255.0. In the "Gateway" line, enter the IP address of the router, which is used to enter the settings.

Advice! The subnet mask and gateway can also be checked through any computer connected to your router. To do this, select Command Prompt from the context menu of the Start button. In the window that opens, enter the command: "ipconfig / all" and press "Enter".

3. Troubleshooting DNS Servers

This method is especially relevant for Samsung TVs. Accessing the Internet and multimedia content through the Smart Hub becomes difficult when Samsung's servers are overloaded. When specifying your own DNS server addresses, the connection to Internet resources will be made directly, without using the manufacturer's infrastructure.

DNS server addresses are specified in the provider's support. You can also use free public DNS. This service is provided Google, Yandex, OpenDNS. For example, to use Google address servers, it is enough to enter the IP of the main server: 8.8.8.8 and additional: 8.8.4.4. If there is no text field for entering an alternative server, enter only the first address in the DNS settings.

4. Using a different WiFi connection method

If you have established a connection by manually entering a wireless network password, try connecting via WPS. WiFi technology Protected Setup allows you to activate the quick connection mode in the TV settings. After that, a similar mode must be activated on the router. This is done through the control panel or a special button on the back of the case.

To log in to the router's web interface, turn the device over and look for the login sticker. It is usually located on the bottom side and indicates the standard IP address, username and password. Enter IP in any browser and provide information account available on the sticker. Then go to the "WPS" section and activate this feature. Fast connection will be available within 1-2 minutes.

In the case when the WPS protocol was used initially, but on this moment connection cannot be established, enter the information manually. When connecting to a hidden network, you will need to specify not only the access key, but also the WiFi name (SSID). TVs with early firmware versions do not always support the search for hidden networks. Therefore, before updating the software, it is recommended to remove the hiding of the network name in the router settings.

5. Reset your TV

A quick way, which in some cases helps to solve problems with WiFi on Smart TV, is restoring factory settings. Before its execution, it is desirable to rewrite the values of the main parameters that are not related to the network. After the reset, you will be able to return them based on the recorded information. Menu path to restore factory settings on popular TV models:

LG: "Settings -> Advanced -> General -> Factory Reset".
Samsung: "Support -> Self-diagnosis -> Reset".
Panasonic: "Settings -> System menu -> Initial settings".

Note! Factory settings will restore more than just the default network settings. Settings for picture, sound, power saving, and other smart TV features will not be saved.

6. Changing the location of the router

Wireless network problems on the TV may be due to poor signal reception from the router. If possible, move the router closer to the Smart TV and install it so that there is less interference in the path of radio waves. The main obstacles to signal transmission are walls, pieces of furniture and working household appliances.

Installing an access point on a hill will help ensure better WiFi connectivity. For example, you can put the router on a cabinet or hang it over a door. If it is not possible to move the router closer to the TV, connect a more powerful antenna to it. The higher the antenna gain, the better the network will work on Smart TV.

7. Troubleshooting WiFi Router

The reason for difficulties when connecting to a wireless network may be incorrect router settings. To change them, go to the control panel. Click the DHCP tab and make sure the DHCP server is enabled and working properly. When it is disabled, the TV and other network devices will not automatically be assigned a local IP address. Normal routing and Internet access will not be possible.

Check the "Security" tab in the router settings. If client MAC filtering is enabled, disable it. On routers from ASUS, TP-Link, D-Link, Huawei and some other manufacturers, the MAC address of any device can be whitelisted. In the future, connections from devices from this list will not be blocked, so normal WiFi operation on the TV will be restored.

The MAC address of the Smart TV is listed in the settings. The exact path differs depending on the brand, on most TVs from popular manufacturers, the necessary information is in the menu:

Samsung: "Support -> Contact Samsung -> Down Arrow -> Wireless MAC".
LG: "Setting -> Support -> Product Information".
Philips: "Installation -> Manual network setup -> View network settings-> Start.

Important! After adding the MAC address of the Smart TV to the "white list" or changing other parameters of the router, restart it. To do this, use the "System" or "System Tools" menu item. You can also use the power button on the case or temporarily unplug the device from the outlet.

8. TV firmware update

The built-in software of Smart TV needs to be updated in time. Errors can accumulate during operation, resulting in difficulties when connecting to the Internet via WiFi. Depending on the TV model, the update can be done in several ways:

Via wireless network;
Using cable Internet;
Via an external USB drive (flash drive or hard drive).

If WiFi is not working on your Smart TV, use the second or third option to download the new software version. Detailed instructions for software updates is usually posted on the website of the company that released the TV. Possible titles for the desired section are "Help", "Support", or "Help Center".

While the utility is running, it is important not to disconnect or de-energize the device. Any interruption may affect the further functionality of the Smart TV. Do not use third party firmware to avoid loss of warranty service.

9. Replacing the WiFi adapter with an external one

This method will not fix problems with the internal radio. But if it is because of them that errors occur when connecting, use an external device. The form factor of such a WiFi adapter resembles a regular USB flash drive. Like most other devices, it works when connected to a TV via USB.

On sale there is another type of adapters for receiving WiFi. They have an external multi-directional antenna that provides better signal reception from the router. Such modules are recommended to be connected via a USB extension cable, placing them at some distance from the TV. Thanks to this connection, interference from a working Smart TV will be minimized, and the data exchange speed will increase.

Important advice! Before buying an external adapter for connecting to a wireless network, check the list of supported devices in the instructions. This information can also be found on the manufacturer's website or in technical support.

Tutorial video: Connecting the TV to a WI-FI network

10. Using a cable connection

The breakdown of the radio module on the TV is the main reason why the previous tips may not help solve the problem. If you have tried all the ways to solve problems with WiFi, most likely there is a malfunction at the hardware level. It is recommended to return the device to a service center. Within the warranty period, the WiFi module will be replaced free of charge.

If it is not possible to take the device to the workshop, you can use the cable connection. To do this, insert one end of the power cord into the "LAN" port on the router, and connect the other end to the TV. Routers usually have 2-4 Ethernet outputs, any of them can be used to connect a TV.

Philips is a famous brand. The Dutch company of the same name has existed since 1891 and supplies the markets different countries original technical products.

All of them are distinguished by quality and attention to detail. SMART TVs do not fall out of this list either.

Each model uses its own development and innovative solutions. This applies to image quality, sound, ergonomics, safety and user convenience. The issue of caring for the environment is not bypassed: competent use of electricity, safe disposal, etc.

Most of today's "smart" Philips TV models are based on the widespread Android TV operating system. In early versions (until 2014) and some low-cost current models, the Smart TV platform is used, it includes MyRemote, SimplyShare, Net TV applications.

The settings depend on the device platform, model. Below we will consider the procedure in the light of connection methods.

Consider the wired and wireless option for setting up Smart TV on Philips TVs.

First way: wireless

You can set access to smart TV on the home screen through a Wi-Fi network. To make numerous applications an integral part of Philips, you need to use the help of such technical guides as:

a router that supports a Wi-Fi network;
wireless adapter (PTA01).

Connection sequence Philips Smart TV:

Turn on the router.
Find a special USB connector on the side panel of the TV receiver.
Insert the adapter into the USB port.
To set up a wireless offer, you need to press the WHS button on the router.
Wait approximately two minutes.
Find the line “Easy access” in the menu, confirm the selected function with the OK button (if necessary, enter and confirm the pin code on request. Press Pin code in the menu - OK - insert the proposed pin).
When prompted for a security key, the sequence is: User – OK – dial the key on the TV remote control.

This program of actions will allow the configured TV to join the home network. If more than one router is found, the network is selected using the Scan buttons. and Easy Access.

Method 2: wired connection

With this method, an Ethernet FTP cable and a router are required to access the smart.

Connect the router to the TV receiver and turn on the conductor.
Press the button on the remote with the image of the house.
Select Settings - Network connection.
Follow the menu items and instructions on the screen.
Confirm the user agreement agreement request.

How to set up IPTV on a Philips TV

Setting up IPTV on Philips TV is made through the widget for Smart TV ForkSmart. The sequence of actions is as follows:

Go to Philips settings setup.
Click view options.
Write down the numbers and letters that appear on the screen.

To connect the TV to your home LAN or to the Internet, you need a router (router) that must support the DHCP protocol (this mode must be enabled).

It is possible to access files on a PC directly from the TV. To do this, you need to install the latest version of the media server on your computer (for example, Windows Media Player 11).

Wired connection (LAN)

Connect your router to your TV with an Ethernet cable. To comply with EMC requirements, you must use an Ethernet FTP Cat. 5E.

Connect the router to the TV and turn on the router before starting the installation.
To start setting up your network, click the button with the home icon on it, then select Settings; ‒> Network connection;.
Then follow the instructions on the screen - the TV will search for a network to connect. When prompted, you must agree to the terms of the End User License Agreement.

Wireless connection (WiFi)

You can connect your TV to a wireless network using a WiFi-enabled router and wireless adapter PTA01.

Turn on your wireless router
Insert the specified WiFi adapter into the USB port on the side of the TV. The wireless connection setup will start immediately:

WPS(Wi-Fi Protected Setup).

If your router supports the WPS function, press the WPS button on it;.
After 2 minutes, select Easy access from the TV menu; and press OK;. If you need to enter a PIN code, press the PIN code in the TV menu; ‒>OK; and then enter the PIN code that appears on the screen into the settings of your router. If you need to enter the security key manually, click Set. user; ‒>OK; and enter the encryption key using the TV remote control. After that, the TV will connect to the home network and the setup will be completed.

If there are multiple routers on the network, you can select the network to use by clicking the Scan button; and Easy access.; to select the desired network.