home » Calculation » Dye a silver fox fur coat. Painting fur with hair dye

Dye a silver fox fur coat. Painting fur with hair dye

Is there a piece of fur that has long gone out of fashion in your wardrobe? It is a pity to throw away clothes made of natural fur, so you can breathe a second wind into it. To do this, the product should be painted or restored to its previous color.

There are several ways to dye fur at home. To do this, it is initially necessary to clean it from traces of dirt and grease. Prepare a foam from liquid soap and water and apply it to the surface of the skin. Try to keep moisture from penetrating the core. Rub a little in the direction of hair growth and rinse with a damp cloth. To dry, flatten the product on a hard surface and fasten the item. It is necessary that the product is in a stretched state. After complete drying, you can start painting. Do you want to lighten fur? In this case, use hydrogen peroxide. It is necessary to apply a 10% solution to the product using a sprayer. After that, keep the solution for 30-40 minutes. Wash off the peroxide with water. In no case do not throw wet fur, it must be dried in a stretched form on a hard surface, so it will not lose its shape. Remember, the mink after clarification with peroxide becomes yellow, and the beaver becomes red. If you want to dye the skin dark, use hair dye. It is best if it is made on the basis of ammonia. On a dry and clean product with a brush, apply cream paint of the selected shade. Soak the composition on the hair for 30 minutes. Rinse under running water. Dry the product by stretching it. It is recommended to dye outerwear made of natural fur in shades one tone darker than at the moment. Do you want to make faded fox fur modern and beautiful? In this case, the gray skin must be washed with shampoo and dried. To make the wool shine, rinse it with a solution of vinegar. To prepare the rinse aid, dissolve a tablespoon of vinegar in a liter of water. After drying the product, lay it on a flat surface and secure with clips. In a plastic bag, make several holes in a checkerboard pattern. Place the bag over the fur and use your crochet hook to pull the strands through the holes. Shake a can of black suede paint and apply it to the wool. After drying, remove the cellophane and comb the product. The result is a highlighted fox. Now all down jackets are decorated with fur dyed in this way. After dyeing, rinse the fur well and pour over it with a solution of vinegar. You can apply hair balm, it will add shine to the product. Don't skimp on paint. Buy funds from well-known and trusted manufacturers. If you want to make the fur lighter by several tones, use a clarifier. In shops household chemicals compositions of "Blondoran" and "Supra" are on sale. They are great for lightening hair. Do not overdo the composition on the hair, as they can be damaged and become brittle. As a result, all the fur will fall out of the mezra.

Do not save, hand over the fur to a dry cleaner or atelier. In such organizations they know how to handle natural fur and suede.

Fur coats, vests, hats made of natural rabbit, fox, silver fox or mink fur are expensive things that we wear for several years. But over time, the fur product begins to lose its original attractiveness: some places are rubbed off, the color fades ... And then we ask ourselves, is it possible to dye the fur at home? Indeed, how else to extend the life of your favorite fur coat? Let's say right away: it is possible, but such a procedure will take a lot of time. Painting a fur product requires special care, and the process itself takes place in several stages.

Preparing the item for painting

Before dyeing the fur at home, it must be cleaned of particles of dirt and grease. If this is not done, the paint may not absorb well and stains and stains will remain on the fur. An alkaline solution is prepared for cleaning. For 1 liter of water you will need:

1 teaspoon of dishwashing detergent or washing powder;
5 g ammonia;
15 g of salt;
10 g of soda.

The resulting liquid must be evenly applied to the entire area of the fur with a brush, and then thoroughly rinsed under running water. If you do not have ammonia or soda at home, you can prepare a solution of alcohol, vinegar and water. All ingredients must be taken in equal parts. Such folk remedies for cleaning will be effective for different types fur - arctic fox, silver fox, rabbit and mink. skin with reverse side it is better to lubricate with a greasy hand cream to prevent drying out.

Coloring

Natural fur is very similar in structure to human hair, which is why it is most effective and convenient to use hair dye from any supermarket or household chemicals store. For a long lasting result, use a good permanent paint. Pay attention to the structure of the fur. Arctic fox and mink fur have a dense pile, unlike rabbit and silver fox, so two packs may be required at once.

Before painting a fur product, you need to try the paint on a small piece of the product. This will help make sure that the dye lays down evenly and the desired shade is obtained. Apply the paint with a brush and then spread the mixture with your hands. It is necessary to withstand the dye for as long as indicated in the instructions for use. Then the thing is thoroughly washed in warm water and left to dry. The use of fans and hair dryers is not recommended.

It is better to paint in shades darker than the base color. If you do the opposite, you can get an unexpected color, for example, mink fur can turn a little yellow when dyed blond. The most pliable in this case is the fur of a white rabbit. It does not need to be bleached and it is easy to give it any color (pink, red, black, ashen). But you need to remember that rabbit fur is a very delicate material and you need to carry out any manipulations with it with special delicacy. If you still doubt that you can dye the fur yourself at home, it is better to contact a specialized workshop.

After you have managed to recolor the fur product, you need to take care of saving the result. So that the paint is well fixed, before drying, the product is placed for some time in warm water with vinegar. Nourishing hair balms will help to give the fur of a rabbit, mink or arctic fox shine and silkiness. Apply the product diluted with water to the dried item with a brush, hold for a few minutes and rinse well.

Fur dyeing is not such a laborious process as it might seem at first glance. The main thing is to correctly choose the color and follow the sequence of actions. Buy expensive durable paint. Then the "new thing" will delight you for more than one year.

Have you ever thought about how to dye fur at home. But surely every modern fashionista has a vest, a sheepskin coat or a fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, and perhaps you will come up with the idea of changing the appearance of an old little thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, at an impressive cost, they do not always meet the expectations of customers. That is why the question of how to dye fur at home, whether it is possible, in general, to carry out this procedure on your own, is very common today. We will talk about it in the framework of this material.

Preparatory activities

The success of the "operation" largely depends on how well the preparatory measures will be carried out. Having decided to update the shade of the fur or radically change it, do not forget to clean it, because the dirt prevents the deep penetration of the dye, respectively, the result of dyeing affects.

For cleaning, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at the nearest pharmacy. All components must be thoroughly mixed with each other until a homogeneous mass is obtained. On the mezdra (bottom layer of the skin), to prevent drying out, apply a greasy cream, for example, for children. Then, armed with a brush with hard bristles, you should apply an alkaline solution to the fur, distributing it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

What to paint?

If you do not know how to dye fur at home, what means to use for this, you have come to the right place. To date, there are enough professional paints and compositions in specialized stores, but hair dye is still no less effective and affordable. You can find it in any supermarket affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing, you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to the option with hard bristles.

fox fur

How to dye fox fur at home? Luxurious vests made of fox skins have been a trend of the last few years. They will be relevant in the near future, which is why the owners of such luxury need to properly care for it: update the shade of fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of the fur product. So why not take advantage of this opportunity?

Deciding on a shade

If you do not know how to dye natural fur at home, in particular fox fur, it is important to get acquainted with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing the fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Let's start coloring

For maximum results, wet the fox fur with water, and then proceed to apply the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to withstand the time indicated on the package. After that, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be approached more demandingly. The same hair dye is perfect, but it is better to give preference to a professional series that will give the most natural natural shade, and it will last much longer than budget counterparts. But some recommend using spray paint. In this case, it is necessary to apply paint from a distance of 60-70 cm in several layers. Do not be afraid to layer paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use general rules working with any fur. In everything, the dyeing procedure completely repeats the procedure for transforming fox fur, described above.

Mouton fur

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made of mouton fur gives. But not everyone knows how to properly care for the fur, which is why, with time of operation, there is a need for additional dyeing.

Mouton products are rightfully one of the most unpretentious, but speaking of staining, you should be patient, be extremely careful and accurate. Since how to paint fur at home with paint in the case of a muton. The pile of such fur is quite thick, dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small section of the fur product - in case of spots and bald spots, it is better to abandon the idea of \u200b\u200bself-dyeing and entrust it to professionals.

Artificial fur

Do you think only natural fur causes admiration and admiring glances of others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have turned the whole idea of fashion, beauty and luxury upside down. If you have a jacket or bag in this material in your wardrobe, update them with dyeing. Want to know how to dye faux fur at home? We will tell you about it.

The same hair dye is suitable for dyeing - in the case of faux fur, you can experiment, give preference to brighter, more acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get the perfect result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

Summing up

We tried to figure out how to dye fur at home, and gave some of the most effective ways. With the proper approach to the procedure, the use of high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information provided and be sure to use our advice and recommendations.

Natural furs are always in trend. A beautiful fur coat serves as a decorative element and at the same time a practical item for protection from low temperatures. At all times, mink has been popular, the demand for such products does not fall even today. Many are interested in whether it is possible to dye a white mink coat and how to care for fur clothing so that it does not lose its solid appearance.

Dyeing a white mink coat

Features of mink coloring

The structure of mink products is as close as possible to the human hairline, which means that you can successfully transform them with high-quality hair dye. It is advisable to use a safe, stable product that has already been tested on your curls. Most gentle paints from reputable manufacturers are suitable for working with delicate natural fur.

Fur dyeing technique

Usually fur coats are repainted at home using a spray gun. It is necessary to keep a distance by placing a container with paint 50-70 centimeters from the surface to be treated. When applying the product, you need to additionally distribute it with the help of palms or a comb. This approach will allow you to quickly remove excess dye and achieve a uniform tone over the entire area of \u200b\u200bthe clothing.

Drying a fur coat

The fur product after dyeing must be dried properly. This final step should be carried out carefully and without haste. This task can be carried out using a household hair dryer. In the process, you must constantly comb the pile. Do not neglect thorough drying, otherwise the fur may take on an unaesthetic appearance.

Fur treatment with balm

According to the experience of resourceful women, hair balm is optimally applied to the mink. This cosmetic product gives the fur softness and a new radiant look. It is important to use quality products.

Professional painting of fur coats

If there is no confidence in the impeccable result of dyeing fur at home, then you should not take risks. You can update the mink product with the help of dry cleaning specialists. Experienced workers will be able to choose a special dye that will give the desired shade, and at the same time they will give a guarantee for the complete safety of the fur.

Mink Paints

If the coloring of the fur coat is carried out for the first time, then it is better to follow the recommendations of experts. They say that top scores give paints sold under the brands Prestige and Farah. When the operation is carried out correctly, the fur will remain bright and beautiful for several months. After prolonged use, the color may fade. It is for mink that not all colors are available, but only noble chestnut, strict black and the most spectacular of them - red. It is the last option that promises to be the most attractive and last as long as possible. Black color is also in demand, but the tone can become dull over time and acquire a brown tint.

Inexperienced women are better off preparing for the procedure by watching video tutorials on the relevant topic. Preliminary obtaining information on updating the fur and studying common mistakes others - will help to exclude damage to the product. Here interesting idea: you can use a stencil and get the original leopard color. So, now we figured out whether it is possible to dye a white mink coat and we know for sure that this is quite feasible, subject to all the rules.

Mink coat: beautiful and practical outerwear that can be quickly updated by dyeing the fur

How to care for a white mink coat?

Property of a white mink coat

A new snow-white mink coat is dazzlingly beautiful, but after a while it inevitably acquires an ugly yellowish tint. Such a product does not radiate luxury, a woman in it looks untidy. To refresh a fur coat and whiten it with high quality, it is better not to use folk remedies, for this purpose there are dry cleaning servants. Perhaps a slight yellow coating can be removed with the help of improvised means, but in advanced cases only special chemicals will help.

Safe operation of a white fur coat

In order to prolong the life of mink fur, the product must be handled as follows:

avoid contact of fur with perfume, the product can cause yellowing;
even if there are no noticeable defects, the product must be handed over annually for preventive purposes to professional dry cleaning;
when the fur has been damaged by rain or snow, do not dry it near heating devices, just hang the product in a warm place;
it is necessary to protect the fur coat in every possible way from friction of vulnerable areas, such as pockets, shoulders, cuffs, it is recommended to minimize the wearing of watches, bracelets, bags with a shoulder strap, piercing the fur with pins and brooches;
when driving in your car, it is better to exclude contact between the mink and the heated seat, otherwise yellowness may appear.

With proper care, a white fur coat made of natural mink will last about ten years. If you want to buy a light fur coat that will look great even after long wear, then you can give preference not to a pure white product, but to pleasant shades. For example, beige, palomino, lavender, melted ice and pastel are fascinatingly beautiful colors of natural mink, on which yellowness is not noticeable at all.

In order for the paint to lay down evenly and reliably color the fur, the product must be prepared for coloring. To do this, the fur surface must be cleaned of grease and dirt with special means.

Before painting, it is necessary to prepare the fur

For cleaning you need:

Before that, you need to prepare an alkaline solution of ammonia, salt, soda and dishwashing detergent (you can use washing powder).
The resulting slurry must be spread evenly on the surface to be treated with a clothes brush.
After some time, wash off the product with running water.

An alternative cleaning solution can be a liquid of alcohol, vinegar and water, which is applied in the same way as the first option.

Such cleaners are suitable for processing the fur of arctic fox, mink, silver fox and rabbit.

Usually, standard hair dye is used to renew the fox. The fur is quite dense, and therefore it will take several packs so that the resulting color is saturated and uniform.

Use hair dye

In this case, you need to choose a paint one or two tones darker than the original. This will avoid unpainted areas and make the thing brighter.

Before covering the entire area with paint, you need to try to process a small area. This will allow you to see how the color will change under the action of chemicals.

Before full dyeing, check how the fur reacts to the paint

In case of color fading (especially the ends of the pile), it is better not to dye the fur, but to lighten it. The main thing in this procedure is to correctly choose the composition for staining. For this, hydrogen peroxide and ammonia are used, taken in different proportions.

Tinted hair balm is an alternative to permanent dye.

Toning with tint balms

It will help to gently color the pile, providing the necessary care for fur products. However, this method of solving the problem is not durable, since the balm is gradually washed off when precipitation in the form of snow and rain enters, and it can also pollute light things that are in close proximity to the fur.

Things made of fox fur often lose their attractiveness due to yellowing of the tips of the pile. In this case, there is no need to paint the entire product. It is enough to use an aerosol can for processing suede.

Aerosol spray for painting

Before dyeing fox fur at home, you need to choose a suitable shade and spray it on the surface at a distance of about 70 cm. To prevent sticking of the pile, you need to constantly move the can. After applying the paint, the fur must be combed with a special brush for suede. And this must be done immediately.

In specialized stores, it is fashionable to purchase special paint in spray cans for fur care. With their help, you can quickly update the shade, making the product brighter.

Professional paint for fur

However, she also has some drawbacks: in contact with white things or a light fur coat, the dye can be transferred to lighter products. And the color itself will lose its luster and brightness after a few months.

Since mink products are considered quite expensive, the dyeing of such fur should be done as delicately as possible.

Before that, you need to check the degree of contamination of the pile. For this, a regular hair dryer will do. A jet of air must be directed to the pile: if the villi crumble, cleaning is unnecessary. However, if the villi roll over from one side to the other, sticking together, cleaning may be required.

Mink fur dyed with hair dye

Step by step procedure

The sequence of actions in both cases is identical:

To start staining, you need to put on gloves and take a brush. After that, apply paint to the surface and smear it in such a way that there are no bright spots left.
After enduring the time indicated on the packaging of the product, the product must be washed with water at room temperature with vinegar. To fix the pigments and make the pile shiny and soft, you need to use the balm that comes with the paint.
Then it must be washed off and dried.

Only a cleaned product can be dyed so that dirt and grease do not prevent the pigment from penetrating into the villi.
When preparing the product for staining, the wrong side of the skin must be covered with cream (or petroleum jelly) to prevent the surface from drying out.
Fur can only be dyed if it is not too old. Otherwise, it may be damaged during color change. In addition, the risk of mechanical damage to the product will increase significantly.
You should choose a dye tone darker than the natural pile. It will help hide minor defects skins and give a natural shade.
To renew fox fur, you can use a manganese solution diluted to a dark brown tint. You need to apply it on the pile with a sponge, without affecting the core (skin). If you neglect the care, you can damage the base of the fur, which will lead to rapid wear of the thing.
Since the skins can shrink after dyeing, you need to place the product on a flat surface and secure it before applying the dye with pins or thin nails.

By applying some fur care tricks, you can provide an attractive look to the product and extend its wear life.