home » Calculation » Traffic sign height restriction. What does the prohibitory road sign "Height restriction" mean?

Traffic sign height restriction. What does the prohibitory road sign "Height restriction" mean?

Currently, there is a height restriction on the roads in the country. According to GOST, when using road devices, in particular, those of a cargo nature, dimensions are subject to accounting, through which safe movement on highways is carried out. The geometry in the SDA is formulated in accordance with the agreements concluded by Russia, which are of an international nature. In addition to our country, it includes states that are members of the CIS. Width and other height restrictions are specified in the said act. The clause has the wording 6.3. Mathematics indicates that the EAC has a height limit of four meters. In China, the limit value for vehicles will be referred to as 4.3 meters.

The sign about the height restriction has a prohibitive character. Concerning it in the legislation there are separate provisions. In particular, the legislator reflects the rules according to which the said sign is installed. This is done to ensure the safety of the people of the country.

Places of such installation are:

sections of the route where gas pipelines are located;
overpass location;
bridges.

This also includes other structures that provide that cars pass under them. The height restriction sign is also placed in those areas where the tunnels are located. Any route should be built taking into account what is shown on the map. According to the rules, the use of these structures is allowed when the car has a lower height than provided for by the building.

Subway travel is not affected by these provisions. Gates in some situations also have an indication of the sign in question. Transportation of goods by transport is also required in accordance with the established provisions. The height sign indicates the presence of the maximum size that a car can have. Drivers of vehicles must take these provisions into account. The height will be given in meters. At the same time, the motorist takes into account not only the car itself, but also the cargo that is transported by it.

General level - those who on their way do not observe established rules regarding the height of the car and cargo - they will not be able to negative consequences. In this situation, violators are subject to liability. These provisions are enshrined in legislation. In addition, it should be borne in mind that the performance of these actions during movement indicates a violation of the structure under which the car passes. It also affects the health of pedestrians and other motorists.

The main violation may be that the fence is destroyed and falls on a person, and damage is also caused to devices that supply light, systems through which video surveillance and other important objects are made. In fact, the person driving the vehicle at the moment in question violates the rules enshrined in the law. These provisions apply to all motorists moving around the country.

If there is a violation of traffic rules, then the driver will not be able to avoid punishment. Moving around objects where signs with restrictions are installed, he violates the rules regarding moving along them. Installation is carried out in accordance with the specified provisions of the law. Buy protection from punishment will not work. Measures of responsibility that are of an administrative nature are assigned. In addition, those provisions reflected in the civil law law may also apply. An important line - the consequences of the violation should be taken into account.

The height restriction sign is in the form of a prohibition and is placed on the ground. It is worth considering that installation work for the installation of this sign are carried out before the zone of action of the sign in question begins. The placement of the height vector, as an example, can be fixed as 3.5 meters. It depends on what the maximum size is envisaged by the design as possible. Height must be taken into account, affecting the distance from the pedestrian crossing or other area on the floor of the road to the edge of the building. In this case, the bottom edge is taken into account. The location of the sea does not matter in this case.

According to the fixed GOST, a small spare distance is established relative to the value in question. Photo symbols in this situation does not apply in statutory provisions. However, legislators reflect that for structures such as overpasses and bridges, the height will be about twenty cm less, while for various kinds of overpasses, such a distance becomes less than about 40 cm. The indicated centimeters are subtracted from the height that is permissible by law. Provisions are provided according to which evacuation or fire routes can be laid at a given distance in the future.

The designation of this sign applies only to freight transport.

In particular, it states:

The sign to some extent repeats the legislative provisions. They affect the rules of vertical layout.
Such marking is applied to structures that have a lateral or upper character.

In order for the sign to be visible in the dark, its drawing will be depicted using paint that has reflection properties. Evacuation, even from a familiar object, is carried out according to detour signs. Garages also have height restrictions in some situations. Flying in aircraft may also affect clearance positions, which indicates that the aircraft cannot be lowered to a certain level.

The construction of the buildings in question is implemented at the level prescribed by law. If the sign is applied on a yellow background, this indicates that it is temporary. When there are discrepancies between permanent and temporary signs, you need to follow the information reflected on the latter.

Responsibility

In private, you can download traffic rules and periodically repeat this, especially for novice drivers. The legislator stipulates that such provisions should be taken into account by all motorists. The consequences of non-compliance with the prescribed rules are various factors. In particular, when a person decides, contrary to physics, to drive under the buildings in front of which the act in question is installed, the consequence will be a catastrophe. The spikes can hook on the structure.

When a truck tries to pass under the indicated buildings, its design is violated. Damage is mechanical in nature. At the same time, these provisions apply to both transport and engineering structures. In this case, the driver endangers both his health and life, and also threatens other people with his actions. At the same time, those who are not guilty of anything suffer.

There are situations when a motorist drives through a structure at his own risk and does not cause damage to a car or structure - in fact, there is a violation of administrative norms.

In this case, the offender may apply:

penalties;
they are expressed in the amount of 500 rubles.

Considerable attention is recommended in these situations. This applies at all times when the vehicle is being driven. In this case, this allows you not to lose sight of all the warnings that are located along the route. If the motorist pays attention to all the signs, this helps him to reach his destination as quickly as possible. Such provisions are associated with the lack of the need to return to a certain point on the route in order to take a detour. Signs for detours are installed next to those indicated. If the goods are damaged, the violator will bear material and other liability. The height restriction sign is important among traffic rules.

The sign is used to prohibit the movement of vehicles whose overall height (with or without cargo) is greater than that indicated on the sign. The sign is installed in cases where the distance from the surface of the road surface to the bottom of the superstructure of an artificial structure, utilities, etc. less than 5 m.

The height indicated on the sign must be less than the actual one by 0.2-0.4 m for utilities, by 0.3 and 0.4 m - for overpasses, along which automobile and railway. The difference between the actual and indicated height can be increased depending on the evenness of the road surface. The repeated sign 3.13 is allowed to be installed on the span of an artificial structure, and if there is a clearance gate in front of it, on the gate.

Signs are made of galvanized metal with a thickness of 0.8-1 mm, with double flanging, which gives additional rigidity to the body of the sign. Each sign has two attachment points in the form of "tongues". The fastening elements are attached to the body by a pecking method, which does not distort the image of the badge and provides much higher reliability than spot welding or rivets.

The base of the road sign is made of galvanized steel 0.8-1mm thick, to increase the rigidity, the workpiece is rolled to obtain a double flanging. A road sign mask is applied to the surface of the base, made of high-quality reflective films in accordance with GOST R 52290-2004 and GOST 32945-2014. Additional stiffening ribs and reinforced fasteners make it possible to exclude the possibility of sign bending both from wind load and under the influence of any forces. To fix the road sign, the base is equipped with a special tongue-type mount.

Any entry is prohibited vehicle, the dimensions of which (with or without cargo) exceed the established figure in height. Road sign 3.13 is installed in cases where the distance from the surface of the road surface to the bottom of the span structure of an artificial structure, utilities, etc. less than 5 m.

Road signs 1.8, 1.15, 1.16, 1.18-1.21, 1.33, 2.6, 3.11-3.16, 3.18.1-3.25, made on a yellow background, are used in places where road works are carried out. At the same time, signs 1.8, 1.15, 1.16, 1.18-1.21, 1.33, 2.6, 3.11-3.16, 3.18.1-3.25, made on a white background, are covered with covers or dismantled

Table E.4

Pickup:

Pickup from a warehouse at the address: Moscow, st. Shosseinaya, 90, building 5

Working hours: Mon-Fri, 10:00 - 18:00

For legal entities upon receipt of the goods, you must have a power of attorney or seal with you. For individuals- passport.

Delivery in Moscow and Moscow region*:

Delivery in Moscow within the Moscow Ring Road - 1000 ** rub.
Delivery up to 10 km outside the Moscow Ring Road - 1500 ** rub.
Delivery from 10 to 20 km outside the Moscow Ring Road - 2000** rub.
Delivery from 20 to 30 km outside the Moscow Ring Road - 2500 ** rub.

Delivery is carried out daily, except weekends and public holidays from 10:00 to 18:00.

*Orders are delivered to the entrance or to the nearest possible parking place, the rise to the floor is carried out by the customer.
** The price is indicated for the delivery of an order with a total weight of not more than 1000 kg, a length of not more than 4 meters.

Delivery across Russia:

Delivery in Russia is carried out by transport companies.

Delivery to the terminals of TC "PEK", TC "GlavDostavka", "DK Transit" (IP Litovchenko) in Moscow - free of charge. To other terminals transport companies(except TK Business Line) according to the price list of delivery in Moscow and the Moscow region.

Prohibiting road signs limiting movement by vehicle dimensions: “Height limit”, “Width limit”, “Length limit” and “Minimum distance limit” sign. What are they used for, where and how are they installed. What do the numbers on these signs mean and the fines for violating the requirements of these signs.

Sign 3.13 "Height limitation"

Road sign 3.13 "Height restriction" is used to prohibit the movement of vehicles whose overall height (with or without cargo) is greater than that indicated on the sign.

The sign is installed in cases where the distance from the road surface to the bottom of the span structure of an artificial structure, utilities, gates, etc. (flying height) less than 5 meters.

The height indicated on the sign is less than the actual height by 0.2 - 0.4 meters. These are the norms. Moreover, this difference between the actual and the height indicated on the sign can be increased depending on the evenness of the road surface (the figure on the sign is slightly less than the actual height of the span).

If the height of the vehicle (with or without cargo) is greater than indicated on the sign, the driver must detour the section of road on a different route. To warn the driver about the vehicle height restriction ahead, sign 3.13 is duplicated, i.e. also installed in advance.

Preliminary sign 3.13 "Height restriction" with a sign is installed behind the intersection at the beginning of the section of the road where restrictions on the height of the vehicle are introduced. Accordingly, at this intersection it is possible to choose another route.

Repeated sign 3.13 (main) is installed directly at the place of restriction. It is allowed to install a sign on the span of an artificial structure, and if there is a clearance gate in front of it, on the gate.

The yellow background of the sign 3.13 "Height restriction" means that the sign is temporary.

Penalty for violation of the sign 3.13 "Height limit"

For non-compliance with the requirement of the sign 3.13 "Height restriction", sanctions may be imposed on the driver in the form of a warning or a fine of 500 rubles under part 1 of article 12.16 of the Code of Administrative Offenses.

If an attempt to pass under the “Height restriction” sign caused undesirable consequences for the flight, cargo or vehicle in the form of damage, i.e. caused an accident, then the sanctions will be different.

Sign 3.14 "Width limitation"

Road sign 3.14 "Width limitation" is used to prohibit the movement of vehicles whose overall width (with or without cargo) is greater than that indicated on the sign.

The sign is installed in front of the passage if its width is less than 3.5 meters (for example, in a tunnel, between bridge supports and in other narrow places). The width indicated on the sign is less than the actual width by 0.2 meters. Those are the rules.

If the width of the car (with or without cargo) is greater than on the sign, then the driver must go around this section of the road on a different route. To warn the driver about the limit on the width of the vehicle ahead, sign 3.14 is installed twice, i.e. first there will be a preliminary sign.

Preliminary sign 3.14 "Width limitation" with a sign is installed behind the intersection at the beginning of the road section, where restrictions on the width of the vehicle are introduced. At this intersection, the driver can change his route and choose another direction.

Repeated sign 3.14 (main) is installed directly at the place of restriction. It is allowed to install a sign on a span or support of an artificial structure.

The yellow background of the sign 3.14 "Width limitation" means that the sign is temporary.

Penalty for violation of the sign 3.14 "Width limitation"

For non-compliance with the requirement of the sign 3.14 "Width limitation", sanctions may be imposed on the driver in the form of a warning or a fine of 500 rubles under part 1 of article 12.16 of the Code of Administrative Offenses.

If an attempt to pass under the “Width Limit” sign caused undesirable consequences for the structure of the span, cargo or vehicle in the form of damage, in other words, caused an accident, then the sanctions will be different, based on the results of the investigation.

Responsibility for the driver for violation of the permissible dimensions of the vehicle during the carriage of goods is determined by parts 1-6 of Article 12.21.1 of the Code of Administrative Offenses. The "range" of fines varies from the degree of violation of the rules for the transportation of goods from 1 to 10 thousand rubles per driver, with the detention of the vehicle.

Sign 3.15 "Length limitation"

Road sign 3.15 "Length limitation" prohibits the movement of vehicles (or combinations of vehicles), the overall length of which (with or without cargo) is greater than that indicated on the sign.

The “Length Limit” sign is used to prohibit the movement of the above vehicles on sections of roads with a narrow carriageway, dense buildings, sharp turns, etc., where their movement or passing with oncoming vehicles is difficult.

If the overall length of the vehicle or vehicle composition (with or without cargo) is more than indicated on the sign, the driver must go around this section of the road on a different route. To warn the driver about the restriction on the length of the vehicle ahead, the sign 3.15 is installed twice, i.e. first there will be a preliminary sign.

Preliminary sign 3.15 "Length limitation" with a sign is installed behind the intersection at the beginning of the road section, where restrictions on the length of the vehicle are introduced. At this intersection, the driver can change his route and choose another direction.

Repeated sign 3.15 (main) is installed directly at the beginning of the restriction.

The yellow background of sign 3.15 "Length limitation" means that the sign is temporary.

Penalty for violation of sign 3.15 "Length limit"

For non-compliance with the requirement of the sign 3.15 "Length limitation", sanctions may be imposed on the driver in the form of a warning or a fine of 500 rubles under part 1 of article 12.16 of the Code of Administrative Offenses.

If an attempt to pass under the “Length Limit” sign caused undesirable consequences for the structure of the passage, cargo or vehicle in the form of damage, i.e. caused the accident, then the sanctions will be different, based on the results of the investigation.

Sign 3.16 "Minimum distance limitation"

Road sign 3.16 "Minimum distance limitation" is used to prohibit the movement of vehicles with a distance between them less than indicated on the sign. Sign 3.16 can be found on bridge structures with spans of limited carrying capacity, on ice crossings, in tunnels, etc.).

The effect of sign 3.16 extends from the place where the sign is installed to the nearest intersection behind the sign, and in locality in the absence of an intersection - to the end of the settlement.

If necessary, the coverage area of the sign 3.16 can be reduced by using a plate.

The yellow background of the sign 3.16 "Minimum distance limitation" means that the sign is temporary.

Penalty for violation of the sign 3.16 "Minimum distance limit"

For non-compliance with the requirement of sign 3.16 "Minimum distance limitation", sanctions may be imposed on the driver in the form of a warning or a fine of 500 rubles. in accordance with Part 1 of Article 12.16 of the Code of Administrative Offenses.

You should not confuse a fine for violating sign 3.16 with a fine for, so to speak, general non-observance of the distance at which an accident occurs (collision from behind). Failure to observe the distance is interpreted as a violation of the location of the vehicle on the roadway, and is punishable under Art. 12.15 part 1 - a fine of 1500 rubles.

In the case of sign 3.16, sanctions will follow for violating the minimum distance.

Navigating a series of articles

Good afternoon, dear reader.

In this article, we will again talk about. This time, the meanings of road signs 3.11 - 3.16 will be analyzed, i.e. signs that are directly related to the characteristics of the vehicle (weight and size).

Height limitation, mass limitation and vehicle length limitation signs will be considered among others.

Let me remind you that earlier in the series of articles "Signs traffic Articles have been published:

Weight limit sign

The weight limit sign prohibits the movement of vehicles whose actual weight exceeds the weight on the sign:

In this case, the movement of vehicles whose mass is more than 7000 kg is prohibited. Naturally, to cars B this limitation does not apply.

This sign is installed, for example, in front of bridges in order to take into account their carrying capacity and prevent overloading. The sign is also installed in front of ice crossings. Violation of its requirements can be very dangerous, because. can lead to the destruction of the crossing and the submersion of the car under water.

Sign limiting the mass per axle of the vehicle

The sign of the restriction of the mass per axle of the vehicle (popularly - the restriction of mass per axle) prohibits the movement of vehicles that have at least one axle with a mass exceeding that indicated on the sign:

In the sign from the example, this is 6,000 kg.

This sign may be used in conjunction with plates 8.20.1 and 8.20.2:

Accordingly, in the presence of the first plate, the sign applies to two-axle bogies, and in the presence of the second, to three-axle ones.

The axle weight limit sign is used, for example, during seasonal traffic restrictions on federal highways. You can read more about this in the article "".

Height restriction sign

road sign height restriction prohibits the movement of vehicles whose height is greater than that indicated on the sign:

It is installed in front of structures with a span height of less than 5 meters. I note that the sign is usually installed with a small margin (20 centimeters), but I do not recommend violating its requirements under any circumstances.

This is due to the fact that every year there are accidents in which trucks crash into bridges or elevated pedestrian crossings. Since a downed bridge usually falls on the cab of the car, this violation does not bode well for the driver.

However, I note that usually collisions occur due to the fact that the truck has a raised body. However, just high cars sometimes knock down bridges.

Width restriction sign

The width restriction sign prohibits the movement of vehicles whose width is greater than the value on the sign:

This sign is installed in front of structures in which the passage width is less than 3.5 meters. The consequences of violating the requirements of the "width restriction" sign are the same as for the previous sign, i.e. the car can destroy the bridge.

Length limit sign

This sign prohibits the movement of vehicles, as well as vehicles, the length of which exceeds the value indicated on the sign:

The length limit sign is designed to prevent vehicles that are too long from entering road sections where they cannot pass. For example, we are talking about about narrow carriageways, sharp curves, etc.

Minimum distance sign

The minimum distance limit sign prohibits drivers from leaving the distance between cars less than that indicated on the sign:

Usually this sign is installed in front of sections of the road that have a limited carrying capacity. For example, we are talking about bridges and ice crossings. Also, this sign is installed in front of weight control points.